Juan Carlos Posada

Prof. Juan Carlos Posada

Instituto Tecnológico Metropolitano ITM
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 July 2016 in Journal of Composite Materials
Verified
Journal Article
Closed access
WYWilliam Urrego Yepes
William Urrego Yepes
JPJuan Carlos Posada
Juan Carlos Posada
LJLeyla Yamile Jaramillo
Leyla Yamile Jaramillo
JSJuan Diego Sierra
Juan Diego Sierra
In this work, the evaluation of a post-industrial residue of coffee industry (coffee husk) as organic filler in functionalised linear low-density polyethylene matrix was investigated. The properties of these composites were compared with more widely used inorganic fillers, such as calcium carbonate and SiO2. All the composites were prepared by grafting of linear low-density polyethylene maleic anhydride and then by melt mixing of fillers. The rheological behaviour of the compounds during processing was established to evaluate the effects of a nanosized (SiO2), micron sized calcium carbonate and coffee husk fillers. Additionally, thermal, morphological and mechanical properties of the polymer composites were evaluated. The results indicated an increase in tensile modulus and tensile strength resulting from incorporation of fillers in the polymer matrix. Some relevant modifications of melting temperature and crystallinity degree for coffee husk composites were observed, but not observed for inorganic fillers composites. The properties of the composites prepared with coffee husk were comparable to those obtained with inorganic fillers, demonstrating that this coffee residue can be used as filler for obtaining composites for many possible applications.

28 July 2016 in Journal of Composite Materials
Verified
Journal Article
Closed access
JPJuan Carlos Posada
Juan Carlos Posada
LJLeyla Yamile Jaramillo
Leyla Yamile Jaramillo
ECEdith Cadena-Chamorro
Edith Cadena-Chamorro
LGLuis Alberto García
Luis Alberto García
Biopolymers as polylactic acid (PLA) have some drawbacks in processing and the final product is characterized by a high permeability to steam/gases and low thermal and mechanical resistance. The addition of reinforcement materials in the biopolymer matrix provides opportunities to minimize these disadvantages. Thus, this research focuses on the inclusion of non-wooden lignocellulosic fillers from bamboo Guadua angustifolia in a polymer matrix obtained from PLA. Three types of fillers were applied: sawdust, fiber from a Kraft process, and fiber with low lignin content. The blends of PLA reinforced with 5% organic fillers were performed on a torque rheometer at temperatures between 170 to 200℃ with the addition of glycerol as plasticizer and viscosity reducer of the system and maleic anhydride as compatibilizer. The evaluation on rheological, thermal, mechanical and morphological properties were investigated by rotational rheometry, differential scanning calorimetry (DSC), universal testing machine, wide angle X-ray diffraction (WAXD) and scanning electron microscopy (SEM). The results showed that the inclusion of the lignocellulosic material generated a positive response in obtaining polymeric biocomposite. The use of fibers subjected to a process of delignification with bleaching sequences OQPoPWa resulted in a greater influence on the mechanical strength, an adequate distribution of the fibers in the PLA matrix and the viscosity of the mixture.

11 August 2023 in Polymers
Verified
Journal Article
Open access
PDF file
CICarlos Andres Vargas Isaza
Carlos Andres Vargas Isaza
JPJuan Carlos Posada
Juan Carlos Posada
JBJuan-Carlos Briñez-De-Leon
Juan-Carlos Briñez-De-Leon
The degree of quality of thermoplastic injection-molded parts can be established based on their weight, appearance, and defects. However, the conditions of the injection process may induce effects on the mechanical performance of the injected parts, and the residual stresses can cause cracks or early failures when an external load or force is applied. To evaluate these mechanical behaviors, different experimental techniques have been reported in the literature, where digital photoelasticity has stood out both for being a non-contact technique and for achieving quantitative results through sophisticated computational algorithms. Against this background, our proposal consists of analyzing the overall residual stress distribution of parts injected under different molding conditions by using digital photoelasticity. In this case, the specimens are subjected to bending strength tests to identify possible effects of the injection process conditions. The findings show that, at mold temperatures of 80 °C, flow-induced residual stresses increase with packing pressure. However, these internal stress levels do not affect the external load applied by the mechanical bending test, while the mass injected at higher levels of packing pressure helps to increase the bending strength of the injected part. At lower mold temperatures (50 °C), the mechanical strength of the injected part is slightly reduced, possibly due to a lower effect of the packing pressure.

8 November 2021 in Informador Técnico
Verified
Journal Article
Open access
PDF file
JPJuan Carlos Posada
Juan Carlos Posada
EMEmmanuel Montes-Florez
Emmanuel Montes-Florez
The production of polymeric materials worldwide in a wide range of applications represented an estimated consumption volume of 359 million tons last year. Polymers, due to their versatility of production and application in various fields of industry, are currently generating an environmental problem due to the large amounts of waste generated for their final disposal. To find environmentally friendly applications, different types of materials have been developed, such as biopolymers, which can be used to manufacture polymeric matrix composite materials with some type of organic filler such as natural fibers to produce products for the food, construction, and automotive sectors, among others. Biodegradable polymers have become a good option to be used as a substitute material that can mitigate to a certain extent the environmental impact generated by conventional polymers. This bibliographic review shows the application trend of polymeric matrix biopolymers with a natural fiber. For this purpose, a search for relevant information on the trends of these materials, as well as their different applications in various sectors of the industry worldwide, was made to provide a clear understanding of the new trends for future developments and research. La producción de materiales poliméricos a nivel mundial representa un consumo estimado en volumen de 359 millones de toneladas en el último año. Los polímeros, por su versatilidad de producción y aplicación en diversos campos de la industria, hoy en día están generando un problema ambiental por las grandes cantidades de residuos que se generan para su disposición final. Con el objetivo de encontrar aplicaciones amigables con el medio ambiente, se han venido desarrollando diferentes tipos de materiales como son los biopolímeros, que se pueden utilizar para fabricar materiales compuestos de matriz polimérica con algún tipo de carga de origen orgánico como las fibras naturales, para elaborar productos para el sector alimenticio, de construcción y automotriz, entre otros. Los polímeros biodegradables se han convertido en una buena opción para ser empleados como material sustituto que puedan mitigar en cierta proporción el impacto ambiental generado por los polímeros convencionales. El presente trabajo reporta una revisión bibliográfica que muestra la tendencia de aplicación de los biopolímeros de matriz polimérica con fibra natural. Para este propósito, se generó una búsqueda de información relevante sobre las tendencias de estos materiales, como también de sus diferentes aplicaciones en diversos sectores de la industria a nivel mundial, que permitan dar un conocimiento claro de las nuevas tendencias de la investigación para futuros desarrollos e investigaciones.

27 March 2023 in Energy Efficiency
Verified
Journal Article
Open access
PDF file
JLJhorman Mena Ledezma
Jhorman Mena Ledezma
JPJuan Carlos Posada
Juan Carlos Posada
In this work, the impact of good manufacturing practices (GMP) on the specific energy consumption (SEC) of plastic injection molding process, in 9 representative companies in Colombia, was studied. The GMP applied to the injection molding process and the degree to which they are adopted by the companies were defined. Afterwards, the SEC of 17 representative injection molding processes in those companies were evaluated. Finally, the impact of applying the GMP and their effect on SEC were studied. The degree of application of GMP on the analyzed companies ranges from 35 to 72%. A single SEC value could not be established for all the injection systems, because it depends on the injected weight and the productivity of each mold-machine-material combination. Nevertheless, a characteristic curve was defined for different systems. A relationship between the application of GMP and SEC was found. It was observed that all GMP contributed to improve the SEC, with different significance, ranging the relevance from 6 to 14%. Finally, it was concluded, taking in consideration a representative company, that “Plasticizing” and “Drive Units” were the most relevant categories to impact the SEC.

20 May 2024 in Cogent Engineering
Verified
Journal Article
Open access
SCSantiago Quiceno Ciro
Santiago Quiceno Ciro
WYWilliam Urrego Yepes
William Urrego Yepes
JPJuan Carlos Posada
Juan Carlos Posada
Alejandro Valencia-AriasAlejandro Valencia-Arias
Alejandro Valencia-Arias