The flow of the hybrid nanofluid (copper–titanium dioxide/water) over a nonlinearly stretching surface was studied with suction and radiation effect. The governing partial differential equations were then converted into non-linear ordinary differential equations by using proper similarity transformations. Therefore, these equations were solved by applying a numerical technique, namely Chebyshev pseudo spectral differentiation matrix. The results of the flow field, temperature distribution, reduced skin friction coefficient and reduced Nusselt number were deduced. It was found that the rising of the mass flux parameter slows down the velocity and, hence, decreases the temperature. Further, on enlarging the stretching parameter, the velocity and temperature increases and decreases, respectively. In addition, it was mentioned that the radiation parameter can effectively control the thermal boundary layer. Finally, the temperature decreases when the values of the temperature parameter increases.

This paper studies the boundary layer flow and heat transfer characteristics past a permeable isothermal stretching/shrinking surface using both nanofluid and hybrid nanofluid flows (called modified Buongiorno nonliquid model). Using appropriate similarity variables, the PDEs are transformed into ODEs to be solved numerically using the function bvp4c from MATLAB. It was found that the solutions of the resulting system have two branches, upper and lower branch solutions, in a certain range of the suction, stretching/shrinking and hybrid nanofluids parameters. Both the analytic and numerical results are obtained for the skin friction coefficient, local Nusselt number, and velocity and temperature distributions, for several values of the governing parameters. It results in the governing parameters considerably affecting the flow and heat transfer characteristics.

The present paper studies the flow and heat transfer of the hybrid nanofluids flows induced by a permeable power-law stretching/shrinking surface modulated orthogonal surface shear. The governing partial differential equations were converted into non-linear ordinary differential equations by using proper similarity transformations. These equations were then solved applying a numerical technique, namely bvp4c solver in MATLAB. Results of the flow field, temperature distribution, reduced skin friction coefficient and reduced Nusselt number were deduced. It was found that increasing mass flux parameter slows down the velocity and, hence, decreases the temperature. Furthermore, on enlarging the stretching parameter, the velocity and temperature increases and decreases, respectively. In addition, that the radiation parameter can effectively control the thermal boundary layer. Finally, the temperature decreases when the values of the temperature parameter increases. We apply similarity transformation in order to transform the governing model into a system of ODEs (ordinary differential equations). Numerical solutions for particular values of involved parameters are in very good agreement with previous calculations. The most important and interesting result of this paper is that for both the cases of shrinking and stretching sheet flows exhibit dual solutions in some intervals of the shrinking and stretching parameter. In spite of numerous published papers on the flow and heat transfer over a permeable stretching/shrinking surface in nanofluids and hybrid nanofluids, none of the researchers studied the present problem. Therefore, we believe that the results of the present paper are new, and have many industrial applications.

Purpose: This paper aims to consider the influence of the temperature and of an external magnetic field on the steady oblique stagnation-point flow for a Boussinesquian nanofluid past a stretching or shrinking sheet. Design/methodology/approach: The flow is reduced through similarity transformations to an ordinary boundary value problem, which is solved numerically in MATLAB using the bvp4c function. The behavior of the solution is discussed physically, and some analytical considerations concerning existence of the solution and the occurrence of dual solutions are drawn. Findings: The study of the influence of an external magnetic field on the oblique stagnation-point flow of a Buongiorno's Boussinesquian nanofluid is carried out. The fluid clashes on a vertical stretching or shrinking sheet. Dual solutions appear for suitable values of the parameters. Originality/value: The present results are new and original.

Purpose: The purpose of this study is to investigate the influence of the second order slip velocity on the boundary layer stagnation point flow of a nanofluid past a non-aligned stretching/shrinking sheet. Design/methodology/approach: Proper similarity variables are used to transform the system of partial differential equations into a system of ordinary (similarity) differential equations. This system is then solved numerically using the bvp4c solver in MATLAB software. As in the papers by Kuznetsov and Nield (2010, 2013) and Fang et al. (2009), the authors considered the stretching/shrinking parameter λ, the first-order (a₁, a₂) and second-order (b₁) slip parameters and the Lewis number Le, Nb the Brownian parameter and Nt the thermophoresis parameter fixed at Le = 10, Nb = Nt = 0.5 when the Prandtl number Pr is fixed at Pr = 1. Findings: Dual solutions are found as the sheet is shrunk in the horizontal direction. Stability analysis shows that the first solution is physically realizable, whereas the second solution is not practicable. Originality/value: The present results are original and new for the study of fluid flow and heat transfer over a stretching/shrinking surface, as they successfully extend the problem considered by Wang (2008) and Lok et al. (2011) to the case of nanofluids.