Recognizing the growing interest in the application of organic photovoltaics (OPVs) with greenhouse crop production systems, in this study we used flexible, roll-to-roll printed, semi-transparent OPV arrays as a roof shade for a greenhouse hydroponic tomato production system during a spring and summer production season in the arid southwestern U.S. The wavelength-selective OPV arrays were installed in a contiguous area on a section of the greenhouse roof, decreasing the transmittance of all solar radiation wavelengths and photosynthetically active radiation (PAR) wavelengths (400–700 nm) to the OPV-shaded area by approximately 40% and 37%, respectively. Microclimate conditions and tomato crop growth and yield parameters were measured in both the OPV-shaded (‘OPV’) and non-OPV-shaded (‘Control’) sections of the greenhouse. The OPV shade stabilized the canopy temperature during midday periods with the highest solar radiation intensities, performing the function of a conventional shading method. Although delayed fruit development and ripening in the OPV section resulted in lower total yields compared to the Control section (24.6 kg m⁻² and 27.7 kg m⁻², respectively), after the fourth (of 10 total) harvests, the average weekly yield, fruit number, and fruit mass were not significantly different between the treatment (OPV-shaded) and control group. Light use efficiency (LUE), defined as the ratio of total fruit yield to accumulated PAR received by the plant canopy, was nearly twice as high as the Control section, with 21.4 g of fruit per mole of PAR for plants in the OPV-covered section compared to 10.1 g in the Control section. Overall, this study demonstrated that the use of semi-transparent OPVs as a seasonal shade element for greenhouse production in a high-light region is feasible. However, a higher transmission of PAR and greater OPV device efficiency and durability could make OPV shades more economically viable, providing a desirable solution for co-located greenhouse crop production and renewable energy generation in hot and high-light intensity regions.

Agricultural greenhouses have been identified as a niche application for organic photovoltaic (OPV) integration, leveraging key performance characteristics of OPV technology, including semi-transparency, light weight, and mechanical flexibility. For optimal electrical design and performance assessment of greenhouse-integrated OPV systems, knowledge of the solar irradiance incident on OPV module surfaces is essential. Many greenhouse designs feature roof curvature. For flexible OPV modules deployed on curved greenhouse roofs, this results in a non-homogenous distribution of solar radiation across the module surfaces, which affects electrical output. Conventional modeling methods for estimating solar irradiance on a PV surface assume planarity, and therefore they are insufficient to evaluate OPV (and other flexible PV) installations on curved greenhouse structures. In this study, practical methods to estimate incident solar irradiance on curved surfaces were developed and then applied in an outdoor performance evaluation of large-area, roll-to-roll printed OPV arrays (3.4 m² active area) installed on a gothic-arch greenhouse roof in Tucson, Arizona between October–February. The outdoor performance of six OPV arrays was assessed using the curved-surface modeling tools primarily considering the effect of irradiance on electrical behavior. The OPV arrays had an overall power conversion efficiency (PCE) of 1.82%, with lower PCE in the afternoon periods compared to morning and midday periods. The OPV arrays experienced an average 32.6% loss in normalized PCE over the course of the measurement period. Based on these results, we conclude that the higher performing OPV devices that are more robust in outdoor conditions coupled with accurate performance monitoring strategies are needed to prove the case for agrivoltaic OPV greenhouses.