We have grown GaAsBi quantum wells by molecular beam epitaxy. We have studied the properties of a 7% Bi GaAsBi quantum well and their variation with thermal annealing. High-resolution X-ray diffraction, secondary ion mass spectrometry, and transmission electron microscopy have been employed to get some insight into its structural properties. Stationary and time-resolved photoluminescence shows that the quantum well emission, peaking at 1.23 μm at room temperature, can be improved by a rapid annealing at 650°C, while the use of a higher annealing temperature leads to emission degradation and blue-shifting due to the activation of non-radiative centers and bismuth diffusion from the quantum well.
The experimental island shapes of III–V islands grown on silicon (001) in the Volmer-Weber growth mode are analyzed in the frame of the theory of wetting in crystals. A reverse Wulff-Kaishew (or Winterbottom) construction is used in order to access interfacial energy. We apply this approach to AlSb and GaSb islands on (001) Si grown by molecular beam epitaxy and observed by scanning transmission electron microscopy. Experimental ratios between energies of (001), (110), (111)A, and (111)B surfaces are established. Interface energies are then quantitatively estimated for GaSb/Si and AlSb/Si interfaces. The differences in the shape of GaSb and AlSb islands, which are consistently reported in the literature, can be clearly attributed to a higher energy for the GaSb/Si interface compared to the ASb/Si one and not to different adatom diffusion lengths. The difference in interface energies is quantified, and its origin at the microscopic level is discussed.
Spontaneously formed Al-As type interfaces of the InAs/AlSb system grown by molecular beam epitaxy for quantum cascade lasers were investigated by atomic resolution scanning transmission electron microscopy. Experimental strain profiles were compared to those coming from a model structure. High negative out-of-plane strains with the same order of magnitude as perfect Al-As interfaces were observed. The effects of the geometrical phase analysis used for strain determination were evidenced and discussed in the case of abrupt and huge variations of both atomic composition and bond length as observed in these interfaces. Intensity profiles performed on the same images confirmed that changes of chemical composition are the source of high strain fields at interfaces. The results show that spontaneously assembled interfaces are not perfect but extend over 2 or 3 monolayers.
InAs quantum boxes have been obtained by molecular beam epitaxy on a GaAs-on-Si substrate using the strained-induced 2D–3D transition. The boxes are examined by transmission electron microscopy and compared with those obtained under the same growth conditions on a GaAs substrate. Although there exist 107 dislocations per cm2 in the GaAs-on-Si substrate, high quality coherent strained islands are observed with a density slightly higher than on GaAs substrate. The behavior of the threading dislocations originating from the Si–GaAs interface when they cross the island plane is also investigated. Although some dislocations are bent in the island plane, the island distribution is apparently not affected by the vicinity of a threading dislocation.
Strained and InAs islands were grown on a InP(113)B substrate by gas source molecular beam epitaxy and examined by transmission electron microscopy and atomic force microscopy. The islands are mainly bounded by the low-index facets {001}, {111}B, and {110} [inclination with respect to the (113)B surface of 25°, 29°, and 31°, respectively]. Some of the consequences of the substrate orientation on the island shape and formation are discussed.
The equilibrium shape of nanoparticles is investigated to elucidate the various core–shell morphologies observed in a bimetallic system associating two immiscible metals, iron and gold, that crystallize in the bcc and fcc lattices, respectively. Fe–Au core–shell nanoparticles present a crystalline Fe core embedded in a polycrystalline Au shell, with core and shell morphologies both depending on the Au/Fe volume ratio. A model is proposed to calculate the energy of these nanoparticles as a function of the Fe volume, Au/Fe volume ratio, and the core and shell shape, using the density functional theory-computed energy densities of the metal surfaces and of the two possible Au/Fe interfaces. Three driving forces leading to equilibrium shapes were identified: the strong adhesion of Au on Fe, the minimization of the Au/Fe interface energy that promotes one of the two possible interface types, and the Au surface energy minimization that promotes a 2D–3D Stranski–Krastanov-like transition of the shell. For a low Au/Fe volume ratio, the wetting is the dominant driving force and leads to the same polyhedral shape for the core and the shell, with an octagonal section. For a large Au/Fe ratio, the surface and interface energy minimizations can act independently to form an almost cube-shaped Fe core surrounded by six Au pyramids. The experimental nanoparticle shapes are well reproduced by the model, for both low and large Au/Fe volume ratios.