David Stone

Prof. David Stone


Research Focus & Metrics

Academic Career Length

35Years (1992-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2016 in Journal of Power Sources
Verified
Journal Article
Closed access
SNS. Nejad
S. Nejad
DGDaniel Gladwin
Daniel Gladwin
DSDavid Stone
David Stone

23 May 2005 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Closed access
BBB.S. Bhangu
B.S. Bhangu
PBP. Bentley
P. Bentley
DSDavid Stone
David Stone
Chris BinghamChris Bingham
Chris Bingham
This paper describes the application of state-estimation techniques for the real-time prediction of the state-of-charge (SoC) and state-of-health (SoH) of lead-acid cells. Specifically, approaches based on the well-known Kalman Filter (KF) and Extended Kalman Filter (EKF), are presented, using a generic cell model, to provide correction for offset, drift, and long-term state divergence-an unfortunate feature of more traditional coulomb-counting techniques. The underlying dynamic behavior of each cell is modeled using two capacitors (bulk and surface) and three resistors (terminal, surface, and end), from which the SoC is determined from the voltage present on the bulk capacitor. Although the structure of the model has been previously reported for describing the characteristics of lithium-ion cells, here it is shown to also provide an alternative to commonly employed models of lead-acid cells when used in conjunction with a KF to estimate SoC and an EKF to predict state-of-health (SoH). Measurements using real-time road data are used to compare the performance of conventional integration-based methods for estimating SoC with those predicted from the presented state estimation schemes. Results show that the proposed methodologies are superior to more traditional techniques, with accuracy in determining the SoC within 2% being demonstrated. Moreover, by accounting for the nonlinearities present within the dynamic cell model, the application of an EKF is shown to provide verifiable indications of SoH of the cell pack.

1 January 2000 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
DSDavid Stone
David Stone
PMP.H. Mellor
P.H. Mellor
DHD. Howe
D. Howe
KAK. Atallah
K. Atallah

25 September 2009 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Closed access
CGC. R. Gould
C. R. Gould
Chris BinghamChris Bingham
Chris Bingham
DSDavid Stone
David Stone
PBP. Bentley
P. Bentley
This paper describes a novel adaptive battery model based on a remapped variant of the well-known Randles' lead-acid model. Remapping of the model is shown to allow improved modeling capabilities and accurate estimates of dynamic circuit parameters when used with subspace parameter-estimation techniques. The performance of the proposed methodology is demonstrated by application to batteries for an all-electric personal rapid transit vehicle from the urban light transport (ULTRA) program, which is designated for use at Heathrow Airport, U.K. The advantages of the proposed model over the Randles' circuit are demonstrated by comparisons with alternative observer/estimator techniques, such as the basic Utkin observer and the Kalman estimator. These techniques correctly identify and converge on voltages associated with the battery state-of-charge (SoC), despite erroneous initial conditions, thereby overcoming problems attributed to SoC drift (incurred by Coulomb-counting methods due to overcharging or ambient temperature fluctuations). Observation of these voltages, as well as online monitoring of the degradation of the estimated dynamic model parameters, allows battery aging (state-of-health) to also be assessed and, thereby, cell failure to be predicted. Due to the adaptive nature of the proposed algorithms, the techniques are suitable for applications over a wide range of operating environments, including large ambient temperature variations. Moreover, alternative battery topologies may also be accommodated by the automatic adjustment of the underlying state-space models used in both the parameter-estimation and observer/estimator stages.

9 January 2013 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Open access
Kan LiuKan Liu
Kan Liu
ZZZ. Q. Zhu
Z. Q. Zhu
DSDavid Stone
David Stone
Winding resistance and rotor flux linkage are important to controller design and condition monitoring of a surface-mounted permanent-magnet synchronous machine (PMSM) system. In this paper, an online method for simultaneously estimating the winding resistance and rotor flux linkage of a PMSM is proposed, which is suitable for application under constant load torque. It is based on a proposed full-rank reference/variable model. Under constant load torque, a short pulse of id ≠ 0 is transiently injected into the d -axis current, and two sets of machine rotor speeds, currents, and voltages corresponding to id = 0 and id ≠ 0 are then measured for estimation. Since the torque is kept almost constant during the transient injection, owing to the moment of system inertia and negligible reluctance torque, the variation of rotor flux linkage due to injected id ≠ 0 can be taken into account by using the equation of constant torque without measuring the load torque and is then associated with the two sets of machine equations for simultaneously estimating the winding resistance and rotor flux linkage. Furthermore, the proposed method does not need the values of the dq -axis inductances, while the influence from the nonideal voltage measurement, which will cause an ill-conditioned problem in the estimation, has been taken into account and solved by error analysis. This method is finally verified on two prototype PMSMs and shows good performance.

14 July 2009 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
YLYi Li
Yi Li
ZZZ. Q. Zhu
Z. Q. Zhu
DHDavid Howe
David Howe
Chris BinghamChris Bingham
Chris Bingham
DSDavid Stone
David Stone
This paper presents an improved signal-injection-based sensorless-control method for permanent-magnet brushless AC (BLAC) motors, accounting for the influence of cross-coupling magnetic saturation between the d- and q -axes. The d- and q -axis incremental self-inductances, the incremental mutual inductance between the d-axis and q -axis, and the cross-coupling factor are determined by finite-element analysis. An experimental method is proposed for measuring the cross-coupling factor which can be used directly in the sensorless-control scheme. Both measurements and predictions show that a significant improvement in the accuracy of the rotor-position estimation can be achieved under both dynamic and steady-state operation compared with that which is obtained with the conventional signal-injection method.