Boron is the key element that plays a critical role in the surface characteristics of electroless nickel-boron (ENB) coatings. However, in literature, the influence of boron content has generally been investigated without considering equal coating thickness conditions. To eliminate the effect of coating thickness and better understand the role of boron content, coatings with equal thickness were produced by varying the deposition time and reducing agent concentration. For this purpose, in this study the total deposition time of 120 minutes (min) was divided into three intervals: (i) 0-25 min, (ii) 25-60 min, and (iii) 60-120 min, corresponding to the 1st, 2nd, and 3rd coating stages, respectively, in order to obtain three individual coatings with an equal thickness approximately 5 µm. In addition, coatings with different boron contents were produced as low-boron (LB), standard-boron (SB), and high-boron (HB) samples, again with constant coating thickness. These coatings were also compared with the combined 15 µm coating obtained after the total 120 min deposition period (1st + 2nd + 3rd stages). The layer-dependent behavior of ENB coatings was investigated for the first time in literature. The surface morphology, boron content, and corrosion behavior of the coatings were characterized using scanning electron microscopy (SEM), inductively coupled plasma-optical emission spectroscopy (ICP-OES), and electrochemical corrosion analyses. The results showed that increasing the reducing agent concentration promoted hydrogen evolution and coating porosity. Therefore, the 1st layer and HB coatings exhibited a rougher cauliflower-type morphology with smaller nodules and higher porosity. In contrast, the 3rd layer and LB coatings exhibited a denser and more homogeneous microstructure with improved corrosion resistance compared to the other groups (1st-2nd layers and HB-SB coatings, respectively). Overall, the findings indicate that the corrosion resistance of ENB coatings is not governed solely by boron content, but is also strongly influenced by hydrogen evolution, porosity, and microstructural homogeneity.