NiTi shape memory alloys produced via additive manufacturing are suffering low tensile strength, low total elongation, and unstable superelasticity, thus failing to meet the requirements of practical applications. Here, we report an strategy to substantially and synergistically improve the strength, ductility, and superelasticity of NiTi produced by laser powder bed fusion through establishing high-density Ni-rich local chemical inhomogeneity (LCI) entities within B2 matrix. Compared with other documented microstructures such as long-range ordered Ni4Ti3 precipitates, the present Ni-rich LCI entities are unique to increase the resistance against dislocation slip, facilitate stress-induced martensitic transformation, and most importantly, relieve local stress concentration around micro-pore defects and entity interfaces. This specialized microstructure endows tensile superelasticity, i.e., tensile ultimate strength of 958.7 MPa, total tensile elongation of 11.2%, superelastic strain exceeding 7%, and superior cyclic stability. The results advance our capabilities in fabricating high-performance superelastic SMAs with complex geometries through additive manufacturing and LCI engineering.
16 August 2021 in ACS Applied Materials & Interfaces
N-doped mesoporous carbons, NMCs, have attracted intensive attention recently and have shown potential applications in various scientific fields including catalysis and energy conversion/storage. Via modification with foreign N elements and construction of mesoporous structures for NMCs, their electronic and spin structure, as well as their porosity can be greatly tailored. And the resultant electron-donor property, surface wettability, conductivity, ion/molecular transfer and reactivity are changed accordingly. In this review, we will summarize the recent research progress of these metal-free NMCs, with an emphasis on their synthesis and performance, especially for their synthetic strategy and catalytic properties toward oxygen and nitro compound reductions, as well as their electrochemical properties as electrode materials for lithium-ion/sulfur batteries and supercapacitors. We hope for future developments, such as controlling doping methods more precisely, generating more active sites by N-doping, and finding wider applications of NMCs in other fields.
The hydrolysis of cellulose to high-yield glucose in water remains challenging owing to the limited acidity and substrate contact of sulfonated carbons. Herein, we report a unique sulfonated mesoporous carbon fiber with optimized acidity prepared by the pyrolysis of FeCl3-impregnated wipe fibers followed by acid treatment. The Brønsted acidity (especially for SO3H) was produced by sulfonation of the magnetic carbon fiber intermediate, while Lewis acidity originated from small Fe3O4 nanoparticles and the remaining defects. The balanced Brønsted and Lewis acidity combined with hydrophilic functionalities was simultaneously tailored by varying the Fe/wipe fiber (WF) feed ratio and pyrolysis temperature to change the porous structure of the final catalysts. The elaborately fabricated MCF-SO3H-20-500 (20% Fe/WF feed ratio and pyrolysis at 500 °C) delivered 66.0% glucose yield as cellulose was completely converted. This is the highest glucose yield achieved by the hydrolysis of untreated cellulose in water over a sulfonated carbon catalyst. The optimized Brønsted and Lewis acidity was mainly responsible for the controlled conversion of cellulose to glucose, while the rich hydrophilic functionalities and superior mesoporous structure of the catalyst facilitated contact to cellulose and mass transfer. This investigation will open new avenues to design high-performance carbon sulfoacid catalysts toward cellulose hydrolysis.
6 January 2025 in Colloids and Surfaces B: Biointerfaces