The deterioration of anhydrite rock exposed to a freeze–thaw environment is a complex process. Therefore, this paper systematically investigated the physical and mechanical evolutions of freeze–thawed anhydrite rock through a series of multi-scale laboratory tests. Meanwhile, the correlation between pore structure and macroscopic mechanical parameters was discussed, and the deterioration mechanisms of anhydrite rock under freeze–thaw cycles were revealed. The results show that with the increase in freeze–thaw processes, the mechanical strength, elastic modulus, cohesion, proportions of micropores (r ≤ 0.1 μm), and PT-Ipore throat (0–0.1 μm) decrease exponentially. In comparison, the mass variation, proportions of mesopores (0.1 μm < r < 1 μm), macropores (r ≥ 1 μm), and PT-II pore throat (0.1–4 μm) increase exponentially. After 120 cycles, the mean porosity increases by 66.27%, and there is a significant honeycomb and pitted surface phenomenon. Meanwhile, as the freeze–thaw cycles increase, the frost resistance coefficient decreases, while the damage variable increases. The correlation analysis between pore structure and macroscopic mechanical parameters shows that macropores play the most significant role in the mechanical characteristic deterioration of freeze–thawed anhydrite rock. Finally, it is revealed that the water–rock expansion and water dissolution effects play a crucial role in the multi-scale damage of anhydrite rock under the freeze–thaw environment.
In this study, an investigation on the formation mechanisms, deformation characteristics, and stability of the Outang landslide, composed by three independent blocks (O1, O2, and O3), is performed by integrating site surveys, multi-technique monitoring data, and numerical simulation. The results show that the formation mechanism for blocks O1 and O3 is slide-bulking, and is planar slide for block O2. These three blocks slide along the incompetent layers (ILs): IL1 is the slip surface of block O1 and O2, and IL3 is the slip surface of block O3. Furthermore, the west local fast movement zone might evolve into deep failure. The slope surface movement is step-like, characterized by the alternation of rapid displacement followed by imperceptible displacement over each hydrological year. The surface displacement velocities increased upslope. Based on the numerical simulation, both precipitation and reservoir water are believed as the major factors driving the slope behaviors, and the slope stability would be decreased gradually under the effect of the periodic variation of water level and seasonal precipitation infiltration. As a result of this study, some countermeasures of landslide and long-term monitoring are recommended.
23 April 2024 in Geotechnical and Geological Engineering