In fields such as industrial engineering and healthcare, additive manufacturing technology is a focal point for researchers. Wear represents a significant challenge for additive manufacturing technology, increasingly emerging as a research hotspot in recent years. This review categorizes and summarizes wear issues in additive manufacturing technology, providing a comprehensive overview of wear mechanisms, materials, and the effects of additive manufacturing processes on wear. Research indicates that different wear mechanisms result in varying wear characteristics. The inherent properties of the materials significantly influence wear during the manufacturing process. Modifying material compositions and optimizing microstructures can enhance the wear properties of additive manufacturing products. Additionally, the study of additive manufacturing technology in repair and maintenance is a current and anticipated research hotspot for the coming decades. In the research of additive manufacturing processes, the effective regulation of process parameters and their post-processing play a positive role in enhancing the wear characteristics of products produced via additive manufacturing. Lastly, the challenges and recent advancements concerning wear issues in the field of additive manufacturing technology research are summarized.
9 November 2017 in Journal of Materials Engineering and Performance
It is of great importance to study the microstructure and textural evolution of laser powder bed fusion (LPBF) formed Hastelloy-X alloys, in order to establish a close relationship between the process, microstructure, and properties through the regulation of the Hastelloy-X formation process parameters. In this paper, components of a Hastelloy-X alloy were formed with different laser energy densities (also known as the volume energy density VED). The densification mechanism of Hastelloy-X was studied, and the causes of defects, such as pores and cracks, were analyzed. The influence of different energy densities on grain size, texture, and orientation was investigated using an electron backscatter diffraction technique. The results show that the average grain size, primary dendrite arm spacing, and number of low angle grain boundaries increased with the increase of energy density. At the same time, the VED can strengthen the texture. The textural intensity increases with the increase of energy density. The best mechanical properties were obtained at the VED of 96 J·mm−3.
This paper presents a systematic numerical investigation of the transient transport phenomenon during the pileup of molten metal droplets on the substrate. The physical mechanisms of the pileup process, including the bulk liquid, capillarity effects at the liquid-solid interface, heat transfer, and solidification, are identified and quantified numerically. The droplet diameter is 100 μm, and the impact velocities are 1–3 m/s. These conditions correspond to Re = O(100), We = O(1). The initial substrate temperature is 350 K. The initial droplet temperature of aluminum alloy molten droplets is 960 K. The numerical models are validated with experiments. The comparison between numerical simulations and experimental findings shows a good agreement. The effects of impacting velocity and relative distances between two successive molten droplets on the end-shapes of impact regime are examined. This investigation is essential to implement effective process control in metal microdroplet deposition manufacture.
Purpose: This paper aims to study numerically the influence of the applied laser energy density and the porosity of the powder bed on the thermal behavior of the melt and the resultant instability of the liquid track.Design/methodology/approach: A three-dimensional model was proposed to predict local powder melting process. The model accounts for heat transfer, melting, solidification and evaporation in granular system at particle scale. The proposed model has been proved to be a good approach for the simulation of the laser melting process.Findings: The results shows that the applied laser energy density has a significantly influence on the shape of the molten pool and the local thermal properties. The relative low or high input laser energy density has the main negative impact on the stability of the scan track. Decreasing the porosity of the powder bed lowers the heat dissipation in the downward direction, resulting in a shallower melt pool, whereas pushing results in improvement in liquid track quality.Originality/value: The randomly packed powder bed is calculated using discrete element method. The powder particle information including particle size distribution and packing density is taken into account in placement of individual particles. The effect of volumetric shrinkage and evaporation is considered in numerical model.