Suitable vertical component distribution within an organic bulk-heterojunction (BHJ) is vital for effective exciton dissociation and smooth charge transport in perovskite/organic integrated solar cells (ISCs). Herein, a bi-continuous interpenetrating network of organic donor/acceptor materials is constructed simply by optimizing their weight ratio, and is further applied in perovskite/organic ISCs. Time-of-flight secondary-ion mass spectroscopy (TOF-SIMS) and scanning Kelvin probe microscopy (SKPM) strongly confirm that this method can effectively restrict vertical stratification and build a desired bi-continuous framework within the organic photoactive layer, which can effectively suppress two potential recombination losses from the viewpoint of kinetics, leading to the PCE increasing from 12.63% to 15.47% for ISCs based on the structure of MAPbI3/PBDB-T : IEICO. Meanwhile, our ISCs combining a UV–vis harvesting layer of MAPbI3 and a near-infrared absorbing layer of PBDB-T : IEICO exhibit a photo-response extending to the whole visible and infrared spectrum (up to 900 nm). This work verifies that tuning the donor/acceptor weight ratio is a feasible strategy for optimizing the morphology of BHJ absorbers and suppressing charge recombination for efficient perovskite/BHJ ISCs.
Due to the inhomogeneous distribution of donor and acceptor materials within the photoactive layer of bulk heterojunction organic solar cells (OSCs), proper selection of a conventional or an inverted device structure is crucial for effective exciton dissociation and charge transportation. Herein, we investigate the donor and acceptor distribution within the non-fullerene photoactive layer based on PBDTTT-ET:IEICO by time-of-flight secondary-ion mass spectroscopy (TOF-SIMS) and scanning Kelvin probe microscopy (SKPM), indicating that more IEICO enriches on the surface of the photoactive layer while PBDTTT-ET distributes homogeneously within the photoactive layer. To further understand the effect of the inhomogeneous component distribution on the photovoltaic performance, both conventional and inverted OSCs were fabricated. As a result, the conventional device shows a power conversion efficiency (PCE) of 8.83% which is 41% higher than that of inverted one (6.26%). Eventually, we employed nickel oxide (NiOx) instead of PEDOT:PSS as anode buffer layer to further enhance the stability and PCE of OSCs with conventional structure, and a promising PCE of 9.12% is achieved.
1 February 2017 in Photonics and Nanostructures - Fundamentals and Applications