This paper concerns research on magnesium oxide layers in terms of their potential use as a gate material for SiC MOSFET structures. The two basic systems of MgO/SiC(0001) and MgO/graphite/SiC(0001) were deeply investigated in situ under ultrahigh vacuum (UHV). In both cases, the MgO layers were obtained by a reactive evaporation method. Graphite layers terminating the SiC(0001) surface were formed by thermal annealing in UHV. The physicochemical properties of the deposited MgO layers and the systems formed with their participation were determined using X-ray and UV photoelectron spectroscopy (XPS, UPS). The results confirmed the formation of MgO compounds. Energy level diagrams were constructed for both systems. The valence band maximum of MgO layers was embedded deeper on the graphitized surface than on the SiC(0001).
In this work the n-GaN(1000) surface is used as a source of nitrogen atoms in order to obtain niobium nitride film by a surface-mediated nitridation technique. To this end, the physical vapor deposition of the niobium film on GaN is followed by sample annealing at 1123 K. A thermally induced decomposition of GaN and interfacial mixing phenomena lead to the formation of a niobium nitride compound, which contains Nb from thin film and N atoms from the substrate. The processes allowed the obtaining of ordered NbNx films on GaN. Structural and chemical properties of both the GaN substrate and NbNx films were studied in-situ by surface-sensitive techniques, i.e., X-ray and UV photoelectron spectroscopies (XPS/UPS) and a low-energy electron diffraction (LEED). Then, the NbNx/GaN surface morphology was investigated ex-situ by scanning tunneling microscopy (STM).
This report presents results of research on electronic structure of three interfaces composed of organic layers of Alq3, Gaq3, or Erq3 deposited on GaN semiconductor. The formation of the interfaces and their characterization have been performed in situ under ultrahigh vacuum conditions. Thin layers have been vapor-deposited onto p-type GaN(0001) surfaces. Ultraviolet photoelectron spectroscopy (UPS) assisted by X-ray photoelectron spectroscopy (XPS) has been employed to construct the band energy diagrams of the substrate and interfaces. The highest occupied molecular orbitals (HOMOs) are found to be at 1.2, 1.7, and 2.2 eV for Alq3, Gaq3, and Erq3 layers, respectively. Alq3 layer does not change the position of the vacuum level of the substrate, in contrast to the other layers, which lower it by 0.8 eV (Gaq3) and 1.3 eV (Erq3). Interface dipoles at the phase boundaries are found to be −0.2, −0.9, −1.2 eV, respectively, for Alq3, Gaq3, Erq3 layers on GaN(0001) surfaces.