An efficient scheme is proposed for experimental measurement of path loss exponent in uniformly attenuated indoor radio channels (lognormal channels with fairly constant log-normal standard deviation). Basically, the scheme suggests proper transmitter (TX) regions to efficiently characterize the radio channel through measurement. The selection of TX locations is based on the statistical analysis of the received signal strength (RSS) derived from a rough pre-model. In this work Seidel-Rappaport site-specific models considered as the pre-model. In this work Seidel- Rappaport site-specific models considered as the pre-model. Experimental results show that the generated statistics of the RSS help select representative TX locations and reduce the number of required measurements accordingly.
This study investigates the performance of level‐crossing sampling (LCS) for efficient sensing of the temporally sparse random signals assuming that the sampling levels can be chosen arbitrarily. In particular, the authors investigate a non‐uniform LCS for sensing temporally sparse signals with sampling levels that are optimised to minimise the reconstruction error based on prior knowledge of signal's probability density function (pdf). Performance results showing the tradeoff between reconstruction error and average number of samples are presented. To define the sampling levels independent from the pdf of the signal, a tractable scheme is proposed. The performance and sampling efficiency of LCS for three schemes of defining the sampling levels when the signal range is known are evaluated.
A significantly low cost and tractable progressive learning approach is proposed and discussed for efficient spatiotemporal monitoring of a completely unknown, two dimensional correlated signal distribution in localized wireless sensor field. The spatial distribution is compressed into a number of its contour lines and only those sensors that their sensor observations are in a $\Delta$ margin of the contour levels are reporting to the information fusion center (FC). The proposed algorithm progressively finds the model parameters in iterations, by using extrapolation in curve fitting, and stochastic gradient method for spatial monitoring. The FC tracks the signal variations using these parameters, over time. The monitoring performance and the cost of the proposed algorithm are discussed, in this letter.
A robust filter-based approach is proposed for wireless sensor networks for detecting contours of a signal distribution over a 2-dimensional region. The motivation for contour detection is derived from applications where the spatial distribution of a signal (such as temperature, soil moisture level, etc.) is to be determined over a large region with minimum communication cost. The proposed scheme applies multi-level quantization to the sensor signal values to artificially create an edge and then applies spatial filtering for edge detection. The spatial filter is localized and is based on an adaptation of the Prewitt filter used in image processing. Appropriate mechanisms are introduced that minimizes the cost for communication required for collaboration. Simulation results are presented to show the error performance of the proposed contour detection scheme and the associated communication cost (single-hop communications with immediate neighborhood in average) in the network.
A class of energy efficient schemes is proposed for detection and tracking of the boundaries of correlated spatial distributions, such as air pollution in large cities at a known threshold level, using large scale wireless sensor network. It is shown that without having the exact statistics of the signal, distributed collaborative space and time oriented filtering can be used to efficiently detect the boundary of the threshold level of a correlated spatial distribution over time. Collaborative signal processing is used to reduce the effect of noisy observations and distributed space and time domain filtering is applied for energy conservative threshold level tracking. It is shown that by using spatial and time oriented filtering, the operating mode of the wireless sensor network is shifted from communication dominant mode toward computation and sensing dominant mode, which significantly saves the in-network energy. The performance of the discussed approach for a few correlated random spatial distributions is evaluated using computer simulations.
A novel on-demand, adaptive compressed sensing approach is proposed and discussed for spatial monitoring of correlated massive data in dense wireless sensor field. The spatial monitoring is based on collecting the sensor observations of a subset of sensors that their reading is in Δ margin of a set of contour levels. The contour level set is adaptively updated in order to reduce the mean square error of reconstruction of the spatial distribution. The reconstruction error and the number of involved sensing nodes as cost are used to compare the proposed approach with spatial monitoring using equally spaced contour levels.