Solar water disinfection (SODIS) is one the cheapest and most suitable treatments to produce safe drinking water at the household level in resource-poor settings. This review introduces the main parameters that influence the SODIS process and how new enhancements and modelling approaches can overcome some of the current drawbacks that limit its widespread adoption. Increasing the container volume can decrease the recontamination risk caused by handling several 2 L bottles. Using container materials other than polyethylene terephthalate (PET) significantly increases the efficiency of inactivation of viruses and protozoa. In addition, an overestimation of the solar exposure time is usually recommended since the process success is often influenced by many factors beyond the control of the SODIS-user. The development of accurate kinetic models is crucial for ensuring the production of safe drinking water. This work attempts to review the relevant knowledge about the impact of the SODIS variables and the techniques used to develop kinetic models described in the literature. In addition to the type and concentration of pathogens in the untreated water, an ideal kinetic model should consider all critical factors affecting the efficiency of the process, such as intensity, spectral distribution of the solar radiation, container-wall transmission spectra, ageing of the SODIS reactor material, and chemical composition of the water, since the substances in the water can play a critical role as radiation attenuators and/or sensitisers triggering the inactivation process.

Solar water disinfection (SODIS) is a simple, inexpensive and sustainable Household Water Treatment (HWT) that is appropriate for low-income countries or emergency situations. Usually, SODIS involves solar exposure of water contained in transparent polyethylene terephthalate (PET) bottles for a minimum of 6 h. Sunlight, especially UVB radiation, has been demonstrated to photoinactivate bacteria, viruses and protozoa. In this work, an in-depth study of the optical and mechanical properties, weathering and production prices of polymeric materials has been carried out to identify potential candidate materials for manufacturing SODIS devices. Three materials were ruled out (polystyrene (PS), polyvinyl chloride (PVC) and polyethylene (PE)) and four materials were initially selected for study: polymethylmethacrylate (PMMA), polypropylene (PP), polycarbonate (PC) and polyethylene terephthalate (PET). These plastics transmit sufficient solar radiation to kill waterborne pathogens with production costs compensated by their durability under solar exposure. A predictive model has been developed to quantitatively estimate the radiation available for SODIS inside the device as a function of the material and thickness. This tool has two applications: to evaluate design parameters such as thickness, and to estimate experimental requirements such as solar exposure time. In this work, this model evaluated scenarios involving different plastic materials, device thicknesses, and pathogens (Escherichia coli bacterium, MS2 virus and Cryptosporidium parvum protozoon). The developed Solar UV Calculator model is freely available and can be also applied to other customized materials and conditions.

Plastic waste generation has become an important problem that critically affects marine and oceans environments. Fishing nets gear usually have a relatively short lifespan, and are abandoned, discarded and lost, what makes them one of the largest generators of ocean plastic waste. Recycled polyolefin resins from fishing nets (rFN), especially from polyethylene (PE), have poor properties due to the presence of contaminants and/or excessive degradation after its lifetime. These reasons limit the use of these recycled resins. This work aims to study the incorporation of recycled fishing nets PE-made to different grades of virgin PE, in order to evaluate the potential use of these rFN in the development of new products. The recovered fishing nets have been fully characterized to evaluate its properties after the collection and recycling process. Then, different PE virgin resins have been mechanically blended with the recovered fishing nets at different recycling contents to study its feasibility for fishing nets or packaging applications. Critical mechanical properties for these applications, as the elongation at break, impact strength or environmental stress cracking resistance have been deeply evaluated. Results show important limitations for the manufacture of fibers from recycled PE fishing nets due to the presence of inorganic particles from the marine environment, which restricts the use of rFN for its original application. However, it is proved that a proper selection of PE raw resins, to be used in the blending process, allows other possible applications, such as non-food contact bottles, which open up new ways for using the fishing nets recyclates, in line with the objectives pursued by the Circular Economy of Plastics.