Visual inspection is an important task in manufacturing industries in order to evaluate the completeness and quality of manufactured products. An autonomous robot-guided inspection system was recently developed based on an offline programming (OLP) and RGB-D model system. This system allows a non-expert automatic optical inspection (AOI) engineer to easily perform inspections using scanned data. However, if there is a positioning error due to displacement or rotation of the object, this system cannot be used on a production line. In this study, we developed an automated position correction module to locate an object’s position and correct the robot’s pose and position based on the detected error values in terms of displacement or rotation. The proposed module comprised an automatic hand–eye calibration and the PnP algorithm. The automatic hand–eye calibration was performed using a calibration board to reduce manual error. After calibration, the PnP algorithm calculates the object position error using artificial marker images and compensates for the error to a new object on the production line. The position correction module then automatically maps the defined AOI target positions onto a new object, unless the target position changes. We performed experiments that showed that the robot-guided inspection system with the position correction module effectively performed the desired task. This smart innovative system provides a novel advancement by automating the AOI process on a production line to increase productivity.

The edge sharpness of a propeller blade plays a vital role in improving energy transmission efficiency and reducing the power required to propel the vehicle. However, producing finely sharpened edges through casting is challenging due to the risk of breakage. Additionally, the blade profile of the wax model can deform during drying, making it difficult to achieve the required edge thickness. To automate the sharpening process, we propose an intelligent system consisting of a six-DoF industrial robot and a laser-vision sensor. The system improves machining accuracy through an iterative grinding compensation strategy that eliminates material residuals based on profile data from the vision sensor. An indigenously designed compliance mechanism is employed to enhance the performance of robotic grinding which is actively controlled by an electronic proportional pressure regulator to adjust the contact force and position between the workpiece and abrasive belt. The system’s reliability and functionality are validated using three different workpiece models of four-blade propellers, achieving accurate and efficient machining within the required thickness tolerances. The proposed system provides a promising solution for finely sharpened propeller blade edges, addressing challenges associated with the earlier robotic-based grinding studies.