Friction models are proposed for anisotropic and heterogeneous dry friction on boundaries of polymer solids. Unit vectors and oriented angles of sliding velocities, radii of curvature and unit normal vectors of sliding trajectories are taken as independent variables in constitutive equations of anisotropic and heterogeneous friction. Heterogeneous dry friction of a polymer pin in pin-on-disc tests is illustrated in the case of Archimedean spiral trajectory. Individual molecular chains composing polymer materials can move inside the material with a high degree of friction anisotropy. The resistance of macromolecule motion is considered with respect to micromechanical models of macromolecules, their kinematics, and friction laws. Two approaches are applied for modeling of anisotropic friction inside polymer materials: continuum-based models (anisotropic viscous friction) and micromechanical models (anisotropic dry friction). Examples of macromolecule dry friction are considered under conditions of spinning and sliding of a disc-like macromolecule and snake-like sliding of a long macromolecule.
This contribution describes differential formulations and variational settings for abrasive wear processes of materials by including a micropolar layer of wear debris between contacting solids and an evolution of a clearance gap during the wear process. Continuum-based models of wear debris describe supply, circulation and ejection of particles from a contact interface. Finite-element-method equations (equilibrium, heat conduction and mass continuity) for wearing out solids and the wear debris layer have been derived from the variational principles.