Swirl brake influences the static and rotordynamic characteristics of labyrinth seal which are important in the prediction of turbomachine stability. To study the influence of the swirl brakes on improving seal stability, the effects of swirl brakes on the static and rotordynamic characteristics of labyrinth seals were investigated by the combination of numerical simulation and experiment. First, it was performed to the effects of swirl brake on the static flow characteristics of labyrinth seal with swirl ratio and pressure distribution based on computational fluid dynamics (CFD). And then a comparison between leakage predicted by the CFD model and measurement was presented to verify the accuracy of the simulation. Moreover, an experiment was implemented to analyze the rotordynamic characteristics of labyrinth seal using an improved impedance method based on an unbalanced synchronous excitation method on a rotor test rig. The influences of swirl brake density, length, inlet/outlet pressure ratio, and rotating speed were measured and discussed, respectively. The CFD numerical results show that the swirl brake effectively reduces the seal swirl ratio (∼60–75% less), circumferential pressure difference (∼25–85% less) so that the seal destabilizing forces decrease. With the increasing of the swirl vanes density and length, the seal leakage drops (∼8–20% less). The experimental rotordynamic characteristics results show that it is more obvious to reduce the cross-couple stiffness (∼50–300% less) and increase the direct damping (∼50–60% larger) with the increasing in the number and length of the swirl vanes, and thus the swirl brake improves the seal rotordynamic stability. The efforts of this paper provide a useful insight to clearly understand the effects of swirl brakes on the labyrinth seal static and rotordynamic characteristics, which is beneficial to improve the design of annular seals.

Uneven pressure drops among stages of multistage brush seal (MBS) leads to early failure of single-stage seal units, which directly affects service life of the seal used in aeroengines, gas turbines, and steam turbines. In this paper, influence factors of interstage pressure drop were studied to analyze formation mechanism of the uneven pressure drops. Moreover, an MBS with differentiated structure was presented, and its interstage pressure drops were further investigated. The results showed that the MBS with several same single-stage seal units had uneven pressure drops among stages under high inlet/outlet pressure ratios. In view of remarkably increasing velocity and decreasing pressure in downstream region of bristle pack near rotor surface during flow of airflow, adjustments of structural parameters (i.e., increasing height of backing plate to rotor surface Hb, increasing seal clearance Hg, and decreasing axial width of bristle pack B) could improve the uneven pressure drops among different stages due to increasing outlet air flow area of the stage. The closer pressure drop proportions of different stages to ideal average value indicated increase of Hb had a more effective effect to balance the pressure drops among different stages compared to increase of Hg and decrease of B. An MBS with differentiated structure, in which both Hb and Hg of all the single-stage seal units were increased progressively and B was decreased step by step, showed a good performance to obtain even interstage pressure drops.

Honeycomb bushing wear has a significant effect on the leakage characteristics of the labyrinth seal. In this paper, four kinds of honeycomb bushing labyrinth seals was designed and processed. The leakage characteristics of honeycomb bushing labyrinth seal were studied experimentally under different inlet and outlet pressure ratios and sealing clearance conditions. At the same time, the numerical model of honeycomb bushing labyrinth seals were established, and the influence of honeycomb bushing wear on the flow field characteristics of labyrinth seals was analyzed by numerical simulation. The existing leakage formula was modified by the correction coefficient method. The results show that with the increase in wear depth, the leakage of the honeycomb bushing labyrinth seal increases, and the maximum leakage can be increased by 59.59%. The wear groove weakens the throttling effect of the labyrinth, causing the leakage of the seal to increase. The increase of the depth of the wear groove changes the flow area and the direction of the jet so that the leakage increases slightly. The influence of the wear groove on the leakage characteristics of the honeycomb bushing labyrinth seal is gradually reduced under the condition of large clearance. The theoretical formula of leakage is corrected by the correction coefficient method. The value calculated by the corrected theoretical formula of leakage is in good agreement with the experiment, and the error is within 10%. It meets the practical application of the project.

To study the influence of taper seal clearance on the static and rotor-dynamic characteristics of hole-pattern damper seals, this paper develops three-dimensional transient computational fluid dynamic methods, which comprise single-frequency and multi-frequency elliptical orbit whirl model, by the transient solution combined with a mesh deformation technique. Through the investigations, it is illustrated that: (1) In the present paper, the leakage rates of convergent-tapered hole-pattern damper seals are less than divergent-tapered hole-pattern damper seals for the same average seal clearance, and the maximum relative variation reaches 16%; (2) Compared with a constant clearance hole-pattern damper seal, the maximum relative variation of the rotor-dynamic coefficients is 1,865% for nine taper degrees in this paper; (3) Convergent-tapered hole-pattern damper seals have smaller reaction forces and effective damping coefficient, larger cross-over frequency, and direct stiffness coefficient, while divergent-tapered damper seals have the opposite effects; (4) Divergent-tapered hole-pattern damper seals alleviate the rotor whirl because of a larger effective damping coefficient when the rotor system has large natural frequency and small eccentricity. Convergent-tapered damper seals provide both sealing and journal bearing capabilities at the same time, and are more advantageous to the stability of the rotor system when rotor eccentricity is the main cause of rotor instability.