Ibrahim Hashlamon

Mr. Ibrahim Hashlamon

UTP Universiti Teknologi PETRONAS
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 July 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Ibrahim HashlamonIbrahim Hashlamon
Ibrahim Hashlamon
ENEhsan Nikbakht
Ehsan Nikbakht
Ameen TopaAmeen Topa
Ameen Topa
Ahmed ElhattabAhmed Elhattab
Ahmed Elhattab
Indirect bridge health monitoring is conducted by running an instrumented vehicle over a bridge, where the vehicle serves as a source of excitation and as a signal receiver; however, it is also important to investigate the response of the instrumented vehicle while it is in a stationary position while the bridge is excited by other source of excitation. In this paper, a numerical model of a stationary vehicle parked on a bridge excited by another moving vehicle is developed. Both stationary and moving vehicles are modeled as spring–mass single-degree-of-freedom systems. The bridges are simply supported and are modeled as 1D beam elements. It is known that the stationary vehicle response is different from the true bridge response at the same location. This paper investigates the effectiveness of contact-point response in reflecting the true response of the bridge. The stationary vehicle response is obtained from the numerical model, and its contact-point response is calculated by MATLAB. The contact-point response of the stationary vehicle is investigated under various conditions. These conditions include different vehicle frequencies, damped and undamped conditions, different locations of the stationary vehicle, road roughness effects, different moving vehicle speeds and masses, and a longer span for the bridge. In the time domain, the discrepancy of the stationary vehicle response with the true bridge response is clear, while the contact-point response agrees well with the true bridge response. The contact-point response could detect the first, second, and third modes of frequency clearly, unlike the stationary vehicle response spectra.


17 January 2019 in Earthquake Engineering and Engineering Vibration
Verified
Journal Article
Closed access
PDF file
YOYu-Chen Ou
Yu-Chen Ou
Ibrahim HashlamonIbrahim Hashlamon
Ibrahim Hashlamon
WooSeok KimWooSeok Kim
WooSeok Kim
HRHwasung Roh
Hwasung Roh

16 November 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Ibrahim HashlamonIbrahim Hashlamon
Ibrahim Hashlamon
ENEhsan Nikbakht
Ehsan Nikbakht
The use of an instrumented scanning vehicle has become the center of focus for bridge health monitoring (BHM) due to its cost efficiency, mobility, and practicality. However, indirect BHM still faces challenges such as the effects of road roughness on vehicle response, which can be avoided when the vehicle is in a stationary condition. This paper proposes a baseline-free method to detect bridge damage using a stationary vehicle. The proposed method is implemented in three steps. First, the contact-point response (CPR) of the stationary vehicle is computed. Secondly, the CPR is decomposed into intrinsic mode functions (IMFs) using the variational mode decomposition (VMD) method. Finally, instantaneous amplitude (IA) of a high frequency IMF is computed. The peak represents the existence and location of the damage. A finite element model of a bridge with damage is created. The results show that the method can identify the damage location under different circumstances, such as a vehicle with and without damping, different speeds of the moving vehicle, different sizes of damage, and multiple damage. A higher speed was found to provide better visibility of damages. In addition, smaller damage was less visible than wider damage.

1 January 2021
Verified
Book Chapter
Closed access
PDF file
Ibrahim HashlamonIbrahim Hashlamon
Ibrahim Hashlamon
ENEhsan Nikbakht
Ehsan Nikbakht
ATAmeen Topa
Ameen Topa

12 November 2025 in Bridge Structures
Verified
Journal Article
Closed access
Ibrahim HashlamonIbrahim Hashlamon
Ibrahim Hashlamon
BABelal Almassri
Belal Almassri
ENEhsan Nikbakht
Ehsan Nikbakht
Indirect bridge health monitoring is a promising measurement technique which has several advantages over the conventional direct method. However, the indirect method still encounters some challenges such as the effect of road roughness and vehicle’s own frequency. Utilizing the scanning vehicle in a stationary state has been proposed to overcome the effects of road roughness. Also, the contact-point response (CPR) has been developed to eliminate the vehicle’s own frequency. However, CPR has been developed for undamped vehicle. Therefore, the first part of this study develops CPR calculation method for a damped vehicle model. The CPR is calculated for a damped stationary vehicle (considering various vehicle frequencies) using the proposed equations. The transmissibility of the CPR is tested by comparing the time and frequency domains between the indirect (vehicle) and bridge direct response (reference). The transmissibility of the vehicle significantly improved by computing CPR, especially for low vehicle frequencies. In the second part of the paper, a frequency-free vehicle is developed in a laboratory set-up. The response of the vehicle does not contain the frequency of the vehicle due to using polyurethane (PU) wheels. Dynamic responses, damping ratios, and mode shapes are compared between the direct and indirect method. Accordingly, the results show that the designed vehicle has high transmissibility of the bridge vibration.