Vibration characteristics of metamaterial beams manufactured of assemblies of periodic cells with built-in local resonances are presented. Each cell consists of a base structure provided with cavities filled by a viscoelastic membrane that supports a small mass to form a source of local resonance. This class of metamaterial structures exhibits unique band gap behavior extending to very low-frequency ranges. A finite element model (FEM) is developed to predict the modal, frequency response, and band gap characteristics of different configurations of the metamaterial beams. The model is exercised to demonstrate the band gap and mechanical filtering capabilities of this class of metamaterial beams. The predictions of the FEM are validated experimentally when the beams are subjected to excitations ranging between 10 and 5000 Hz. It is observed that there is excellent agreement between the theoretical predictions and the experimental results for plain beams, beams with cavities, and beams with cavities provided with local resonant sources. The obtained results emphasize the potential of the metamaterial beams for providing significant vibration attenuation and exhibiting band gaps extending to low frequencies. Such characteristics indicate that metamaterial beams are more effective in attenuating and filtering low-frequency structural vibrations than plain periodic beams of similar size and weight.
13 April 2011 in Journal of Intelligent Material Systems and Structures
Conventional energy harvester typically consists of a piezoelectric element, which is sandwiched between a proof mass and a base subjected to sinusoidal excitation. The resulting relative motion between the proof mass and the base produces a mechanical strain in the piezoelectric element, which is converted into electrical power by virtue of the direct piezoelectric effect. In this study, harvester is provided with a dynamic magnifier consisting of a spring-mass system which is placed between the piezoelectric element and the moving base. The main function of the dynamic magnifier, as the name implies, is to magnify the strain experienced by the piezo-element in order to amplify the electrical power output of the harvester. With proper selection of the design parameters of the magnifier, the harvested power can be dramatically enhanced and the effective bandwidth of the harvester can be improved. The theory governing the operation of this class of energy harvesters with dynamic magnifier (EHDM) is developed using the Lagrangian dynamics approach. Numerical examples are presented to illustrate the performance characteristics of the EHDM in comparison with the conventional energy harvesters. The obtained results demonstrate the feasibility of the EHDM as a simple and effective means for enhancing the magnitude and spectral characteristics of conventional harvesters.
28 July 2016 in Journal of Intelligent Material Systems and Structures
Vibration band gaps and elastic wave propagation are examined in the metamaterial plates manufactured with periodic locally resonant membranes arranged in a square array. Periodic metamaterials exhibit unique dynamic characteristics stemming from their ability to act as mechanical filters for wave propagation. As a result, waves propagate along the periodic cells only within specific frequency bands called the pass bands, while being blocked within other frequency bands called the stop bands. The proposed metamaterial plates are equipped with sources of local resonances which act as local absorbers of mechanical vibrations. The macroscopic dynamical properties of the resulting periodic structures depend on the resonant properties of substructures which contribute to the rise of interesting effects such as broad stop band characteristics that extend to lower frequencies. Externally excited piezoelectric polyvinylidene difluoride membranes are used to support the local resonators. The stiffness of the piezo-membranes is tunable by means of an external voltage allowing us to control the location and bandwidth of the local resonance frequencies. The predicted band structures are validated by investigating the frequency response of the plate to external mechanical excitations using a comprehensive finite element model of the entire structure. By examining the proposed metamaterial plate, it is shown that it would be possible to actively control the wave propagation both in the spectral and spatial domains in an attempt to steer, stop, and/or confine the propagation of undesirable external disturbances.
12 January 2010 in Journal of Intelligent Material Systems and Structures
Considerable interest has been devoted to the development of various classes of acoustic metamaterials that can control the propagation of acoustical wave energy through these materials. However, all the currently exerted efforts are focused on studying passive metamaterials with fixed material properties. In this article, the emphasis is placed on the development of a new class of composite acoustic metamaterials with effective bulk moduli that are programmed to vary according to any prescribed pattern along the volume of the metamaterial. The composite consists of an acoustic cavity, which is coupled with an array of actively controlled Helmholtz resonator to enable the control of the effective bulk modulus distribution along the cavity. The theoretical analysis of this class of multi-cell composite active acoustic metamaterials (CAAMM) is presented and the theoretical predictions are determined when the Helmholtz resonators are provided with piezoelectric boundaries. These smart boundaries are used to control the overall bulk modulus of the cavity/resonator assembly through direct acoustic pressure feedback. The interaction between the neighboring cells of the composite metamaterial is modeled using a lumped-parameter approach. Numerical examples are presented to demonstrate the performance characteristics of the proposed CAAMM and its potential for generating prescribed spatial and spectral patterns of bulk modulus variation.
24 April 2012 in Journal of Vibration and Acoustics
Conventional energy harvester typically consists of a cantilevered composite piezoelectric beam which has a proof mass at its free end while its fixed end is mounted on a vibrating base structure. The resulting relative motion between the proof mass and the base structure produces a mechanical strain in the piezoelectric elements which is converted into electrical power by virtue of the direct piezoelectric effect. In this paper, the harvester is provided with a dynamic magnifier consisting of a spring-mass system which is placed between the fixed end of the piezoelectric beam and the vibrating base structure. The main function of the dynamic magnifier, as the name implies, is to magnify the strain experienced by the piezoelectric elements in order to amplify the electrical power output of the harvester. With proper selection of the design parameters of the magnifier, the harvested power can be significantly enhanced and the effective bandwidth of the harvester can be improved. The theory governing the operation of this class of cantilevered piezoelectric energy harvesters with dynamic magnifier (CPEHDM) is developed using the finite element method. Numerical examples are presented to illustrate the merits of the CPEHDM in comparison with the conventional piezoelectric energy harvesters (CPEH). The obtained results demonstrate the feasibility of the CPEHDM as a simple and effective means for enhancing the magnitude and spectral characteristics of CPEH.
Extensive efforts are being exerted to develop various types of acoustic metamaterials to effectively control the flow of acoustical energy through these materials. However, all these efforts are focused on passive metamaterials with fixed material properties. In this paper, the emphasis is placed on the development of a class of one-dimensional acoustic metamaterials with tunable effective densities in an attempt to enable the adaptation to varying external environment. More importantly, the active metamaterials can be tailored to have increasing or decreasing variation of the material properties along and across the material volume. With such unique capabilities, physically realizable acoustic cloaks can be achieved and objects treated with these active metamaterials can become acoustically invisible. The theoretical analysis of this class of active acoustic metamaterials is presented and the theoretical predictions are determined for an array of fluid cavities separated by piezoelectric boundaries. These boundaries control the stiffness of the individual cavity and in turn its dynamical density. Various control strategies are considered to achieve different spectral and spatial control of the density of this class of acoustic metamaterials. A natural extension of this work is to include active control capabilities to tailor the bulk modulus distribution of the metamaterial in order to build practical configurations of acoustic cloaks.