This paper presents a procedure for the derivation of an equivalent thermal network-based model applied to three-core armored submarine cables. The heat losses of the different metallic cable parts are represented as a function of the corresponding temperatures and the conductor current, using a curve-fitting technique. The model was applied to two cables with different filler designs, supposed to be equipped with distributed temperature sensing (DTS) and the optical fiber location in the equivalent circuit was adjusted so that the conductor temperature could be accurately estimated using the sensor measurements. The accuracy of the proposed model was tested for both stationary and dynamic loading conditions, with the corresponding simulations carried out using a hybrid 2D-thermal/3D-electromagnetic model and the finite element method for the numerical resolution. Mean relative errors between 1 and 3% were obtained using an actual current profile. The presented procedure can be used by cable manufacturers or by utilities to properly evaluate the cable thermal situation.
10 July 2006 in IEEE Transactions on Circuits and Systems I: Regular Papers
This paper focuses on the natural response computation of linear time-invariant (LTI) circuits, in those cases in which a closed-form solution, rather than numerical integration of the state-variable equations, is preferable. A computationally efficient procedure is presented to individually obtain the eigenvectors of matrix A, both for distinct and repeated eigenvalues. Instead of performing orthogonal matrix transformations, the proposed method relies on the solution of the nodal equations corresponding to a zero-input circuit in the generalized phasor domain. This allows propagation of natural modes to be computed by means of a simple procedure that closely resembles conventional ac analysis.
This paper presents a new application of a recently developed self-tuned Kalman filter to the low-pass filtering stage required in some active power filter algorithms, so that they have a faster response than conventional running averages in certain circumstances.
This paper proposes a simple enough yet challenging lab setup illustrating the application of power electronics to power system devices through a thyristor-assisted under-load tap changer. After a preliminary analysis of the special switching concepts involved in this application, a thorough description of the main steps comprising the proposed experiment is carried out. This lab setup has been included in the electrical engineering curriculum (major in power engineering) of most senior undergraduate students (fifth year in several European countries).