The article discusses the quality testing of a measuring system consisting of a CNC machine with measuring probes. The research was conducted in a broader context regarding the implementation of the closed door technology, i.e., production without human intervention, in an aviation plant manufacturing aircraft gearbox systems. This technology may involve automated measuring operations performed in machining centers, and not in measuring laboratories, provided that the quality of the measurements is appropriate. The aim of the study was to investigate whether the CNC machining device can be used to measure the geometric features of aircraft gearbox housing. For this purpose, measurement experiments were carried out with the use of three different probes. Measurements were carried out using four sequences of increasing complexity, so that, after error analysis, it was possible to find the causes of possible irregularities. A reference ring with known dimensions and position in the working space of the machine was used for the measurements performed as part of the assessment of the measurement system. The quality of the measurements was evaluated with the use of repeatability and reproducibility testing and statistical process control. The analysis results showed that the tested measurement system ensures adequate accuracy and repeatability, and the measurement process is characterized with adequate efficiency in relation to the manufacturing tolerance of the components produced using the machine. Thus, it was proven that the measurement process can be carried out on a machining device, which enables its integration into the closed door technology.

This paper deals with the development of dimensional control technology for the production of ADT (accessory drive train) gearbox housing. The project included the development of a robotic geometry inspection station for thin-walled aerospace casings. Laser profilometers from two brands, Cognex and Keyence, were used to measure. A proprietary software solution for arc measurements is presented. The obtained solutions were compared and verified in accordance with the requirements of the manufacturer Pratt and Whitney Rzeszów S.A. The results of the work indicated that correct solutions were obtained with a very large reduction in control time. In addition, the measurement is fully automated and transferable to the company’s electronic systems.

This paper deals with the development of dimensional control technology for the production of accessory drive train (ADT) gearbox housing, according to the closed door technology approach. The work presents the methodology of the final inspection of bearing seat position deviation by replacing the coordinate measuring machines (CMMs) with a computerized numerical control (CNC) machine and adaptive neuro-fuzzy inference system. The results of the work indicated that correct solutions were obtained. In addition, the technological process of manufacturing is fully automated and performed entirely on the production line.