In this study, three full-scale experiments and a series of numerical simulations were conducted to investigate the influence of subway platform height and atrium ceiling height of subway stations on smoke control by mechanical exhausting systems. The smoke temperature variation with time, maximum temperature distribution, and smoke stratification were discussed. Results showed that the atrium had capacity to store smoke, especially at the early stage of smoke spread. However, the efficiency of smoke extraction did not increase simply with the rise in platform height and atrium ceiling height, and favorable smoke exhaust velocity was crucial for smoke elimination. The optimal smoke exhaust velocity was studied by numerical simulation and it was found that the area of smoke diffusion in subway stations with a higher platform was significantly smaller under the optimal smoke exhaust velocity. In addition, a prediction model of optimal smoke exhaust velocity with subway platform height was proposed. This study could provide on-site data and smoke spread characteristics for smoke control design, operation, and, significantly, guide safety evacuation of the exhaust system of subway stations.

In this research, the influence of confined space size on the temperature distribution characteristics of internal window plumes from well-ventilated compartment fires was studied. Theoretical analysis was firstly used to establish a mathematical model for the smoke after ejecting from the window in the space. The study considered fire heat release rate and vertical height as dependent variables. Numerical simulations and experimental methods were carried out to study the temperature variations. A critical distance L₂ was obtained. Results show that when the space D between the vertical retaining wall and the building façade is greater than L₂, the variation of D has little influence on radial temperature. Once D is less than L₂, the radial temperature distribution inside the confined space will tend to be consistent, and the temperature in the confined space sharply increases as D decreases. In addition, a dimensionless model was derived to quantify the relationship between temperature rise and vertical height. The experimental and numerical simulation results were processed, which are in good agreement with the model. The study can provide a framework for managing building safety.

Asymmetrical V-shaped tunnels often appear in tunnels crossing the river or urban underground road tunnels. The smoke flow inside is affected by a lot of factors. A full understanding of the smoke flow in this kind of tunnel is the basis of the smoke control. In this study, the effects of slope composition and fire heat release rate (HRR) on the longitudinal induced airflow velocity, the smoke back-layering length at the small slope side, and the maximum ceiling temperature were studied by the numerical method. The results show that when the fire occurs at the slope change point of the V-shaped tunnel, the maximum ceiling temperature decreases with the increase in the slope of the large-slope side tunnel. The longitudinally induced velocity is primarily related to the slope of the large-slope side tunnel and the fire HRR. When the slope difference between the side tunnels or the slope of the large-slope side tunnel is large, the smoke in the small-slope side tunnel flows back toward the fire source after reaching its maximum dispersion distance and then reaches a quasi-steady state. The smoke back-layering length is mainly affected by the slope and length of the large-slope side tunnel. When the slope of the large-slope side tunnel is 9%, the induced airflow velocity from the small-slope side can prevent the spread of smoke. The empirical models of the smoke back-layering length and the longitudinal induced airflow velocity in the small-slope side tunnel are drawn, respectively, by the theoretical analysis and the numerical results. This study can provide technical support for the design and operation of smoke control systems in V-shaped tunnels.