Fiber eavesdropping severely endangers the confidentiality of data transmitted in optical networks. Therefore, it is necessary to explore how to detect and locate fiber eavesdropping in an effective approach. To leverage the advantages of the state of polarization (SOP) in detecting various abnormal events while addressing its challenges in acquiring the SOP of different fiber links, we propose a multi-channel joint SOP estimation scheme to estimate the SOP of different fiber spans. Based on the proposed scheme, we provide a comprehensive solution for fiber eavesdropping location and detection in optical communication systems. In this solution, the estimated SOP and optical performance monitoring (OPM) data are utilized for rapid fiber eavesdropping detection and coarse location at the span level. The effectiveness of the solution is validated by experiments. In the aspect of detection, we achieve the detection of the start or end of fiber eavesdropping, the overlapping of fiber eavesdropping and abnormal events, and other abnormal events. The overall accuracy is 99.77%. In the aspect of location, we can locate the fiber span that has been eavesdropped.
The performance of an optical stealth transmission system based on gain-switched laser depends largely on the laser parameters. Modulation frequency, bias current, and modulation current are considered to study the covertness and bit error rate performance of the optical stealth transmission system. According to optical stealth carrier generation with time spreading and all-optical encoding, the stealth signals are derived. A complementary encoding scheme is adopted in the system simulation. The simulation results show that the temporal and spectral characteristics of the generated stealth signal can be changed by adjusting the bias current, modulation current, and modulation frequency. However, there is a trade-off between bit error rate performance and covertness of the stealth channel. Under the premise of error-free transmission, the bias current and modulation frequency should be reduced and the modulation current should be improved to optimize the covertness of the stealth channel.
In optical covert communication systems based on gain-switched distributed feedback semiconductor lasers, the trade-off between the modulation frequency and the spectral imperceptibility limits the bit rate of the secure channel. To improve the system performance in terms of the bit rate and covertness, optical time-division multiplexing is introduced to optical covert communication for the first time. The optical time-division multiplexed covert channel can work under both multiple-user and single-user conditions. The optical time-division multiplexed covert communication system is demonstrated via a system simulation. The results show that the covertness is enhanced by the optical time-division multiplexing in the spectral domain. The receiver sensitivity of the multiple-user condition is lower than the single-user one.
A 2.5Gb/s optical steganography system using an Amplified Spontaneous Emission light source was experimentally demonstrated over a 40km public channel. The ASE signal was modulated by intensive modulation and spectrum encoded by Wavelength Selective Switch.
This article proposes and experimentally demonstrates a covert key distribution scheme based on the phase fluctuation of a gain-switched laser diode (GSLD). The gain-switched pulse is used to generate the covert signal through spectral broadening and temporal spreading. The amplified spontaneous emission (ASE) light is used to generate ASE noise in the public channel. Eavesdroppers cannot perceive signals hidden in the public noise. The experimental results show that the correlation coefficient of the key waveforms reaches 0.95, and the scheme’s key generation rate (KGR) reaches 1.88 Gbit/s through a 25 km single-mode fiber (SMF). Moreover, the binary bitstreams have passed the NIST statistical test suite. The covert key distribution scheme proposed in this article provides an efficient way for the method of “one-time-pad” key distribution in high-speed optical communication systems.
We investigate on the wideband phase-modulation to amplitude-modulation (PM-AM) conversion based on the chromatic dispersion in fiber. To overcome the shortcomings of the single-tone or dual-tone modulation-based model in previous researches, we present a more intuitive time-frequency analysis method for the propagation of phase-modulated signals in dispersive fibers, and give the physical picture for the temporal waveform changes. By analyzing the amplitude variation near the transition zone, we establish a bit-by-bit correspondence between the pulse waveforms and the actual modulated data, and realized the non-return-to-zero (NRZ) differential phase-shift keying (DPSK) demodulation. Furthermore, the effect of fiber length and bit rate on PM-AM conversion is also investigated quantitatively and experimentally.