This paper presents a new and efficient methodology for distribution network reconfiguration integrated with optimal power flow (OPF) based on a Benders decomposition approach. The objective minimizes power losses, load balancing among feeders, and is subject to constraints: capacity limit of branches, minimum and maximum power limits of substations or distributed generators, minimum deviation of bus voltages, and radial optimal operation of networks. A specific approach of the generalized Benders decomposition algorithm is applied to solve the problem. The formulation can be embedded under two stages: the first one is the master problem and is formulated as a mixed integer nonlinear programming problem. This stage determines the radial topology of the distribution network. The second stage is the slave problem and is formulated as a nonlinear programming problem. This stage is used to determine the feasibility of the Master problem solution by means of an OPF and provides information to formulate the linear Benders cuts that connect both problems. The model is programmed in the general algebraic modeling system. The effectiveness of the proposal is demonstrated through three examples extracted from the literature.

Present regulatory trends are promoting the irect participation of wind energy in electricity markets. The final result of these markets sets the production scheduling for the operation time, including a power commitment from the wind generators. However, wind resources are uncertain, and the final power delivered usually differs from the initial power committed. This imbalance produces an overcost in the system, which must be paid by those who produce it, e.g., wind generators among others. As a result, wind farm revenue decreases, but it could increase by allowing wind farms to submit their bids to the markets together with a hydro generating unit, which may easily modify its production according to the expected imbalance. This paper presents a stochastic optimization technique that maximizes the joint profit of hydro and wind generators in a pool-based electricity market, taking into account the uncertainty of wind power prediction.En prens

This paper presents an approach to determine the optimal daily generation scheduling based on the Spanish electricity market rules. The Spanish power system considers the pool-based daily market and the technical constraints resolution as two different and consecutive processes. After the daily market has been cleared, a centralized constraints resolution process is applied to this initial scheduling through the redispatch of previously matched energy. In this paper, an algorithm based on Benders decomposition, arranged in three levels, is proposed to solve the technical constraints solution process in order to define a preventive secure dispatch. The constraints resolution process includes a full ac network and security model. This method determines the active power committed to each generating unit so as to minimize the energy redispatch cost subject to dispatch, network, and security constraints. The solution also provides the reactive power output of the generating units, the value of the transformers taps, and the committed voltage control devices. The model has been tested in an actual example of the Spanish power system. Some relevant results are reported.

A new and efficient methodology for distribution network reconfiguration integrated with optimal power flow (OPF) based on a Benders decomposition approach is presented. The objective minimises power losses, balancing load among feeders and subject to constraints such as capacity limit of branches, minimum and maximum power limits of substations or distributed generators, minimum deviation of bus voltages and radial optimal operation of networks. A variant of the generalised Benders decomposition algorithm is applied to solve the problem. The formulation can be embedded under two stages; the first one is the master problem and is formulated as a mixed integer non-linear programming problem. This stage determines the radial topology of the distribution network. The second stage is the slave problem and is formulated as a non-linear programming problem. This stage is used to determine the feasibility of the master problem solution by means of an OPF and provides information to formulate the linear Benders cuts that connect both problems. The model is programmed in GAMS mathematical modelling language. The effectiveness of the proposal is demonstrated through two examples extracted from the specialised literature.