For the repair level and spare parts stocking problems, generally METRIC type methods and Level of repair analysis (LORA) are used separately. Since LORA does not consider the availability of capital goods, solving LORA and spare parts stocking problems sequentially may lead to suboptimal solutions. On these considerations, this study presents a joint optimization method to minimize the service logistics cost under the constraints of system availability. Maintenance capability factor and maintenance decisions are introduced into the joint optimization model to express the influence of multiple failure modes on repair level and spare parts stocking. Thus, we establish the bridge relationship between LORA and METRIC models. The joint optimization model is solved by an improved iterative algorithm, and a typical fleet system is taken as an example to verify the correctness and effectiveness of the model and the algorithm. Compared with the optimization of spare parts inventory and maintenance level independently, the joint optimization method could effectively reduce the service logistic system cost.
8 March 2022 in Computational Intelligence and Neuroscience
For the repair level and spare parts stocking decision problems, generally METRIC type methods and level of repair analysis (LORA) are used separately. In practical engineering, the repair level of large-scale systems is usually judged according to the failure modes. The method of judging the repair level by the maintenance success rate is no longer applicable. In the case of multiple failure modes of a large-scale system, considering the requirements of system availability, we build a spare parts stocking decision and service logistics cost optimization model of a two-echelon service logistics system. Aiming at the spare parts stocking allocation problem caused by multiple failure modes, we improve the iterative greedy heuristic algorithm to find the global optimal stocking allocation strategies. Finally, through the analysis of typical examples, the correctness and effectiveness of the model and algorithm are verified. The impact of multifailure mode spare parts stocking allocation strategies on availability and service logistics cost is analyzed. The research results are helpful to simplify the support engineering design process of system engineers and have certain theoretical and application value.
Film sound reproduction is the process of converting the image-form film soundtrack to wave-form movie sound. In this paper, a novel optical imaging based reproduction framework is proposed with the basic idea that restoring film audio damage in the image domain. In traditional reproduction method, the scanning light emitted by film projector causes inversible physical damage to the flammable film soundtrack (made of Nitrate compounds). By using optical imaging method in film soundtrack capturing, our framework can avoid the damage and the self-ignition problem. Experiment results show that our framework can improve the reproduction speed to 2 times while maintaining equal sound quality. Also, the sound sampling rate can be enhanced to 162.08%.
A novel single-fed wideband stacked circularly polarized (CP) microstrip antenna with a perturbated square ring is proposed in this work. This antenna has a relatively small size since four symmetric square slots and a cross-shaped slot are incorporated into the square patch, which extends the current path and reduces the overall size. The antenna bandwidth is substantially enhanced with the combination of a perturbated square ring and a slot-loaded parasitic patch. All the substrates are made by low-cost FR4 material. LHCP radiation is implemented by choosing the position of the structure perturbation in the square ring. Good agreement is observed between measurement and simulation. The measured −10 dB bandwidth, 4 dB axial ratio and peak gain is 15.3 % (853–993 MHz), 880–945 MHz, and 7.2 dBic, respectively. The proposed CP antenna demonstrates advantages of a compact size, low-cost, wideband, and good radiation performance, which is suitable for RFID reader application.