Due to significant reduction in fossil fuel sources, several researches have been conducted recently to explore modern sources of renewable energy. One of the major fields in the category of renewable energy harnessing devices is parabolic trough solar collector (PTC). Several parameters have effect on the overall efficiency of the PTCs. As the effect of these parameters is coupled to each other, a comprehensive investigation is necessary. In the present study, a numerical analysis is performed to examine the efficiency of PTCs via variation of several governing parameters (e.g., wind velocity magnitude, nanoparticles volume fraction, inlet temperature, and reflector's orientation). A detailed set of absorber, reflector, and protection glass in addition to the surrounding environment is modeled to capture sufficiently accurate data. The working fluid is assumed to be nanofluid to inspect the advantage of metallic nanoparticle addition to the base fluid. The Monte Carlo radiation tracing method is utilized to calculate the solar gain on the absorber tube. According to the obtained results, the efficiencies are reduced by 1–3% by rotating the reflector by 30 deg relative to wind direction. Moreover, 14.3% and 12.4% efficiency enhancement is obtained by addition of 5% volume fraction of Al2O3 to the base synthetic oil for horizontal and rotated reflectors, respectively.
4 December 2019 in Journal of Thermal Analysis and Calorimetry
Numerical study of the slip effects and radiative heat transfer on a steady state fully developed Williamson flow of an incompressible Newtonian fluid; between parallel vertical walls of a microchannel with isothermal walls in a porous medium is performed. The slip effects are considered at both boundary conditions. Radiative highly absorbing medium is modeled by the Rosseland approximation. The non-dimensional governing Navier–Stokes and energy coupled partial differential equations formed a boundary problem are solved numerically using the fourth order Runge–Kutta algorithm by means of a shooting method. Numerical outcomes for the skin friction coefficient, the rate of heat transfer represented by the local Nusselt number were presented even as the velocity and temperature profiles illustrated graphically and analyzed. The effects of the temperature number, Grashof number, thermal radiation parameter, Reynolds number, velocity slip length, Darcy number, and temperature jump, on the flow field and temperature field and their effects on the boundaries are presented and discussed.
25 June 2019 in International Journal of Numerical Methods for Heat & Fluid Flow
Purpose: The nanofluid flow and heat transfer within a heat exchanger, with different thermal arrangements of internal active bodies, are investigated. Design/methodology/approach: For the numerical simulations, the lattice Boltzmann method is utilized. The KKL model is used to predict the dynamic viscosity of CuO-water nanofluid. Furthermore, the Brownian method is taken account using this model. The influence of shapes of nanoparticles on the heat transfer performance is considered. Findings: The results show that the platelet nanoparticles render higher average Nusselt number showing better heat transfer performance. In order to perform comprehensive analysis, the heatline visualization, local and total entropy generation, local and average Nusselt variation are employed. Originality/value: The originality of this work is carrying out a comprehensive investigation of nanofluid flow and heat transfer during natural convection using lattice Boltzmann method and employing second law analysis and heatline visualization.
In this paper, the modeling of a steady state two phase flow heated through a vertical upward flow under electro-magneto-hydro-dynamic forces is presented. The thermal non-equilibrium, non-homogeneous, two-phase flow model consisting of mass, momentum and energy conservation in each phase has been adjusted for subcooled inlet conditions close to saturation. The P-1 approximation, viscous dissipation and Joule heating are included in the energy equations. It was seen that the Lorentz force can decrease and postpone the bubble generation, as well as affect the slip velocity, flow forces, viscous dissipation and Joule heating. Furthermore, two correlations for the slip velocity under magnetohydrodynamic (MHD) forces are presented. As shown, skin friction and Joule heating increase with the magnetic field strength.
1 October 2019 in Physica E: Low-dimensional Systems and Nanostructures