Detection of relevant contaminants using screening approaches is a key issue to ensure food safety and respect for the regulatory limits established. Electrochemical sensors present several advantages such as rapidity; ease of use; possibility of on-site analysis and low cost. The lack of selectivity for electrochemical sensors working in complex samples as food may be overcome by coupling them with molecularly imprinted polymers (MIPs). MIPs are synthetic materials that mimic biological receptors and are produced by the polymerization of functional monomers in presence of a target analyte. This paper critically reviews and discusses the recent progress in MIP-based electrochemical sensors for food safety. A brief introduction on MIPs and electrochemical sensors is given; followed by a discussion of the recent achievements for various MIPs-based electrochemical sensors for food contaminants analysis. Both electropolymerization and chemical synthesis of MIP-based electrochemical sensing are discussed as well as the relevant applications of MIPs used in sample preparation and then coupled to electrochemical analysis. Future perspectives and challenges have been eventually given.
Monitoring synthetic colorants in foods is important due to their potential toxicity and pathogenicity. We propose here a new and simple method for the extraction and determination of erythrosine B (ERT-B) in food samples. A composite of polydopamine-based molecularly imprinted polymers coating magnetic nanoparticles (Fe3O4@PDA@MIP) was synthesized using a green approach and exploited for the magnetic dispersive solid-phase extraction (MDSPE) of ERT-B. Fe3O4@PDA@MIP provides a rapid extraction of ERT-B, exhibiting good reusability and preconcentration ability. Moreover, the MIP showed a relatively good imprinting factor (3.0 ± 0.05), demonstrating excellent selectivity against patent blue (an interfering dye) and other food matrix components. The proposed MDSPE was coupled to colorimetric smartphone-based detection that allowed us to obtain similar performances of UV–Vis spectroscopy detection. The smartphone-based optical detection facilitated the determination of ERT-B in the 0.5–10 mg/L range, with a limit of detection of 0.04 mg/L. The developed method was successfully employed to determine ERT-B in food samples (juice, candy, and candied cherries) with good recovery values (82–97%).
Aflatoxins (AFs) are fungi secondary metabolites produced by the Aspergillus family. These compounds can enter the food chain through food contamination, representing a risk to human health. Commercial immunoaffinity columns are widely used for the extraction and cleanup of AFs from food samples; however, their high cost and large solvent consumption create a need for alternative strategies. In this work, an alternative strategy for producing molecularly imprinted polymers (MIPs) was proposed to extract aflatoxins AFB1, AFB2, AFG1, and AFG2 from complex food samples, using liquid chromatography coupled with tandem mass spectrometry (LC–MS/MS). The MIPs were synthesized via a low-cost and rapid (5 min) sonochemical free-radical polymerization, using 1-hydroxy-2-naphthoic acid as a dummy template. MIPs-based solid phase extraction performance was tested on 17 dietary supplements (vegetables, fruits, and cereals), obtaining appreciable recovery rates (65–90%) and good reproducibility (RSD ≤ 6%, n = 3); the selectivity towards other mycotoxins was proved and the data obtained compared with commercial immunoaffinity columns. The proposed strategy can be considered an alternative affordable approach to the classical immunoaffinity columns, since it is more selective and better performing.
The need for rapid, on-site contaminant detection is becoming increasingly vital for tackling environmental and public health challenges. This study introduces an efficient method for detecting sulfamethoxazole (SMX), a widely used antibiotic with significant environmental implications. A cost-effective, scalable approach was developed using lab-on-paper devices integrated with molecularly imprinted polymers (MIPs), synthesized through an in situ photopolymerization process that was completed in just 10 min. Using only 2 mL of MIP solution enabled the efficient mass production of 100 disks. Traditional template extraction, which often takes hours or days, was reduced to just 10 min using a multichannel micropipette and absorbent fabric. The MIP-PAD achieved a limit of detection (LOD) of 0.8 µg/mL and a limit of quantification (LOQ) of 2.4 µg/mL, with measurements obtained using a smartphone-based colorimetric detection system. It exhibited excellent repeatability, with a relative standard deviation (RSD) of 3.26% across seven tests, high reusability for up to eight cycles, and recovery rates for real samples ranging from 81.24% to 99.09%. This method provides notable improvements in sensitivity, reproducibility, and environmental sustainability over conventional techniques. The user-friendly platform integrating smartphone-based colorimetric detection is highly practical for real-time applications, offering broad potential for environmental monitoring, food safety, and healthcare.