The main function of food packaging is to maintain food’s quality and safety. The use of active packaging, including antimicrobial materials, can significantly extend the shelf life of food. Many of these packaging solutions are based on the application of polymer films containing metal nanoparticles (e.g., Ag, Au, Cu) or metal oxides (e.g., TiO₂, ZnO, MgO). However, the use of iron nanoparticles is rarely mentioned. In the study, polylactide (PLA) films containing zero-valent iron (ZVI) were made by casting method. Pure PLA films and PLA films with the addition of Fe₂O₃ were used as comparative materials. The composition and structure of ZVI/PLA films were evaluated with scanning electron microscopy. The XRD spectra performed on ZVI/PLA films confirmed the presence of iron in the packaging material and revealed their oxide form (Fe₂O₃). The addition of zero-valent iron in the concentration 1%, 3%, or 5% resulted in the formation of crystallographic planes measuring 40.8, 33.6, and 28.6 nm, respectively. The color and gloss of the films, and their antimicrobial activity against bacteria (Bacillus subtilis, Escherichia coli, Staphylococcus epidermidis) and fungi (Geotrichum candidum, Rhodotorula rubra) were also examined. The PLA films with addition of 3% of ZVI (w/w) inhibited the growth of all tested organisms in contrast to PLA and PLA/Fe₂O₃ films. The addition of ZVI to polymer matrix caused changes in its appearance and optical properties. The ZVI/PLA coating used on polyolefin film allowed to extend the shelf life of goat cheese packed in examined material to 6 weeks. Considering the antimicrobial properties of the ZVI/PLA films and PLA biodegradability the obtained material can be successfully applied in the food industry.

In these research studies, fly ash (SW-FA) resulting from the incineration of sunflower (20%) and wood (80%) waste employing the circulating fluidized bed combustion (CFBC) technology was used to analyze the possibility of removing Pb(II) and Cu(II) ions in adsorption processes. Currently, great emphasis is placed on circular economy, zero waste or climate neutrality strategies. The use of low-cost SW-FA waste seems to fit well with pro-ecological, economic and energy-saving trends. Hence, this material was characterized by various techniques, such as granulation analysis, bulk density, SEM-EDX, XRD and XRF analysis, BET, BJH, thermogravimetry, zeta potential, SEM morphology and FT-IR spectrometry. As a result of the conducted research, the factors influencing the effectiveness of the adsorption process, such as adsorbent dosage, initial and equilibrium pH, initial metal concentration and contact time, were analyzed. The maximum removal efficiency were achieved at the level of 99.8% for Pb(II) and 99.6% for Cu(II), respectively. The kinetics analysis and isotherms showed that the pseudo-second-order equation and the Freundlich isotherm models better describe these processes. The experiments proved that SW-FA can act as an appropriate adsorbent for highly effective removal of lead and copper from wastewater and improvement of water quality.

The work presents studies on the application of hydrometallurgical recovery of cobalt(II) from solutions after leaching spent industrial catalysts used in process of hydrodesulfurization. A four-stage process was proposed, which consists of: leaching, precipitation of metal hydroxides accompanying Co(II), extraction of Co(II) with bis(2,4,4-trimethylpentyl)phosphinic acid and Co(II) stripping from the organic phase. The results indicate that by using the proposed method it is possible to leach Co(II) and Mo(VI) from spent catalyst, and remove main impurities such as Al(III), Fe(III) in hydroxide precipitation step and separate Co(II) from Mo(VI) by extraction and stripping.

The purpose of this study is to correlate surface properties of laundry detergents and model surfactant solutions with their washing abilities. For the study, laundry detergents available on the Polish market were selected and categorized according to their retail price: the cheapest (P1, P2, P3), average priced (P4, P5, P6, P7, P8) and the most expensive (P9, P10). Anionic sodium dodecylbenzenesulfonate and nonionic nonaethylene glycol monodecyl ether were used for the preparation of the model solutions. The content of the anionic and nonionic surfactants in the detergents was determined. Cotton fabrics were soiled with black carbon/olive oil, make-up, curry, red wine, tomato sauce, blood, chocolate, peat, tea, β-carotene, grass, animal fat/red dye, baby food, clay, butter and used engine oil. Detergency tests were carried out at a temperature of 40℃ in laboratory conditions using washing powders and model surfactant solutions in various concentrations. On the basis of the correlation between detergency and detergent properties, the most favorable size range of powder granules was identified. The negative correlation between contact angle, surface tension and detergency and the positive relationship between phosphorus pentoxide and active oxygen content, spreading coefficient, diffusion coefficient and detergency were determined. The closest correlation between surfactant content and detergency was observed at a concentration of 10 g/L, which resulted in maximum detergency. When the emulsifying properties were better, their soil removal efficiency was greater. Based on the analysis of the correlation, the characteristics of the tested laundry detergent solutions that had the greatest ability to remove dirt were described.

The sustainable development of construction materials is an essential aspect of current worldwide trends. Reusing post-production waste in the building industry has numerous positive effects on the environment. Since concrete is one of the materials that people manufacture and use the most, it will continue to be an integral element of the surrounding reality. In this study, the relationship between the individual components and parameters of concrete and its compressive strength properties was assessed. In the experimental works, concrete mixes with different contents of sand, gravel, Portland cement CEM II/B-S 42.5 N, water, superplasticizer, air-entraining admixture, and fly ash from the thermal conversion of municipal sewage sludge (SSFA) were designed. According to legal requirements in the European Union, SSFA waste from the sewage sludge incineration process in a fluidized bed furnace should not be stored in landfills but processed in various ways. Unfortunately, its generated amounts are too large, so new management technologies should be sought. During the experimental work, the compressive strength of concrete samples of various classes, namely, C8/10, C12/15, C16/20, C20/25, C25/30, C30/37, and C35/45, were measured. The higher-class concrete samples that were used, the greater the compressive strength obtained, ranging from 13.7 to 55.2 MPa. A correlation analysis was carried out between the mechanical strength of waste-modified concretes and the composition of concrete mixes (the amount of sand and gravel, cement, and FA), as well as the water-to-cement ratio and the sand point. No negative effect of the addition of SSFA on the strength of concrete samples was demonstrated, which translates into economic and environmental benefits.