In order to study the mechanical properties of inverted cone bottom oil storage tanks under earthquakes when the foundation is uneven, finite element modeling calculation for a 20,000 m3 storage tank is carried out based on ANSYS Workbench. Wind load, hydraulic pressure load, and seismic load are all equalized as distributed loads with varying spatial positions. Considering various combinations of different heterogeneous foundations and seismic loads, and by adjusting the preset foundation bed coefficient, the final foundation bed coefficient and the maximum foundation settlement value when the equivalent stress of the tank floor reaches yield strength under different conditions are calculated. The results show that under the condition of heterogeneous foundation stiffness considering seismic action, when the coefficient of local foundation bed is higher than that of natural silty clay, the requirement for safe use of the inverted cone bottom storage tank can be met. Among the seven simulated heterogeneous foundation forms, the form with high foundation stiffness on the windward side has a great influence on the safety of storage tanks.
The characteristics of bridge pile-group foundation have a significant influence on the dynamic performance of the superstructure. Most of the existing analysis methods for the pile-group foundation impedance take the trait of strong specialty, which cannot be generalized in practical projects. Therefore, a project-oriented numerical solution algorithm is proposed to compute the dynamic impedance of bridge pile-group foundation. Based on the theory of viscous-spring artificial boundary, the derivation and solution of the impedance function are transferred to numerical modeling and harmonic analysis, which can be carried out through the finite element method. By taking a typical pile-group foundation as a case study, the results based on the algorithm are compared with those from existing literature. Moreover, an impact experiment of a real pile-group foundation was implemented, the results of which are also compared with those resulting from the proposed numerical algorithm. Both comparisons show that the proposed numerical algorithm satisfies engineering precision, thus showing good effectiveness in application.
24 August 2024 in International Journal of Structural Stability and Dynamics