In order to realize the reproduction and simulation of urban rainstorm and waterlogging scenarios with complex underlying surfaces, based on the 1D–2D coupled models, we constructed an urban storm–flood coupling model considering one-dimensional river channels, two-dimensional ground and underground pipe networks. Luoyang City, located in the western part of Henan Province, China was used as a pilot to realize the construction of a one-dimensional and two-dimensional coupled urban flood model and flood simulation. The coupled model was calibrated and verified by the submerged water depths of 16 survey points in two historical storms flood events. The average relative error of the calibration simulated water depth was 22.65%, and the average absolute error was 13.93 cm; the average relative error of the verified simulated water depth was 15.27%, the average absolute error was 7.54 cm, and the simulation result was good. Finally, 28 rains with different return periods and different durations were designed to simulate and analyze the rainstorm inundation in the downtown area of Luoyang. The result shows that the R2 of rainfall and urban rainstorm inundation is 0.8776, and the R2 of rainfall duration and urban rainstorm inundation is 0.8141. The study results have important practical significance for urban flood prevention, disaster reduction and traffic emergency management.
How to detect potential useful technical information hidden in patents and scientific papers is crucial for technology trend forecasting and potential research opportunities. Using the text mining method to extract hidden technical information is helpful in assisting strategic decision-making and predicting the tendency of technological development. This study proposes a framework to combine patent analysis and scientific paper analysis to predict technology trends and discover technology opportunities. By mining the hidden technical information, we compared an analysis of patents and scientific papers to reveal the technological development trajectory and future development trends and discover potential technological innovation opportunities. First, we extracted the knowledge contained in patents and scientific papers by text mining. Then, we cleaned and coded the data through natural language processing. We used the Latent Dirichlet Allocation topic model to cluster topics and list the multi-dimensional hierarchical structure diagram. We compared and analyzed results, combined them with expert knowledge, and drew a technology roadmap to predict future development trends and discover technological opportunities. Finally, we used refrigerated container technology as an example for validation. Results showed that the framework proposed in this study can directly and comprehensively display the development trend of technology and discover potential technological innovation opportunities to verify the effectiveness of the framework. The proposed method also provides an effective reference and inspiration for future research.
There are many sand-laden waters in China, and the wear of hydraulic structures caused by sand-laden water diversion has been paid more and more attention. Taking the spillway of a reservoir as the research object, the numerical model of erosion wear caused by sediment-laden particle flows on the spillway was established by using the computational fluid dynamics (CFD) method, VOF (Volume of Fluid) multiphase flow model and DPM (Discrete Phase Model). Through the simulation analysis of the spillway’s overall erosion, the distribution of the spillway erosion wear was obtained. Then, according to the main wear parts, the single variable, such as sediment diameter, sediment concentration, flow velocity and gate opening degree, was changed to study the erosion amount of the spillway and the distribution law of the spillway erosion parts. The results show that the main erosion sites of the spillway are at the bottom of the gate chamber and the middle section of the spillway. The maximum erosion increases linearly with the increase in sediment concentration. With the increase in sediment concentration, the sediment concentration changed from 1 kg/m3 to 6 kg/m3, and the maximum erosion of the spillway increased from 2.58 × 10−7 kg/m2 to 1.53 × 10−6 kg/m2. The erosion at the bottom of the spillway and gate leaf increases first and then decreases with the increase in sediment diameter and reaches the maximum value when the particle size is 0.002 mm. The erosion at the bottom of the spillway and the gate leaf increases with different growth trends as the flow velocity increases, when the flow velocity increases from 2 m/s to 9 m/s and the maximum erosion amount at the bottom of the spillway increases from 3.66 × 10−7 kg/m2 to 1.14 × 10−6 kg/m2, and the maximum erosion of the gate leaf increased from 1.66 × 10−8 kg/m2 to 8.98 × 10−6 kg/m2. The erosion amount at the bottom of the spillway increases with the increase in the gate opening between 0 and 3 m and tends to be stable when the gate opening is greater than 3 m. The maximum erosion position moves to the rear part of the spillway with the change in the gate opening. The change in the gate opening has no obvious effect on the erosion amount of the gate leaf but only changes the area of the gate erosion part. Thus, the erosion wear distribution of spillway under different work conditions is summarized, and the qualitative study between the erosion wear and the distribution of sediment diameter, sediment concentration, flow velocity and gate opening degree is made.