This study focuses on the stability analysis of slopes reinforced by soil nailing. The effects of slope geometry and nail parameters on slope stability are investigated using PLAXIS 2D. Four different slope angles and three different backslope angles are considered for assessing the effect of slope geometry on the stability of a nailed slope. The factor of safety (FS) was found to decrease with the increasing values of the slope angle as well as the backslope angle. The influence of different nail parameters (nail inclination, nail length, and nail spacing) was also investigated. With the increase in nail inclination, FS was found to increase initially and thereafter, reaching a peak value followed by a drop in FS. The optimum nail inclination was found between 0 and 25° at a horizontal angle, depending on the different slope geometries, which is evident from observation of the slip surface as well. With the increase of nail length, FS increases; however, the increase was small after L/H (length of nail/height of slope) reached a value of 0.9. Moreover, increasing the length of the nail was found to be effective in reducing the lateral movement of the slope. The maximum nail forces are observed in the bottom-most row of nails and increase with the depth. The inclusion of soil nailing with optimum nail parameters can increase FS by 29–75% depending on the slope geometry, signifying the effectiveness of nailing.
In this study, an attempt is made to uncover and discuss the geo-environmental characteristics, triggers, and consequences of a landslide disaster in the Chattogram Hill Tracts (CHT) region of Bangladesh. The hilly areas are composed of Tertiary and Quaternary sediments which have been folded, faulted, uplifted and, then deeply dissected by rivers and other water bodies. This paper presents a case study on the geotechnical investigation and numerical modeling of the landslides of 13 June 2017. A field visit and soil sample collection, followed by laboratory testing were conducted at the landslide-afflicted areas. The study revealed that the soil type was an important factor behind landslides, while high precipitation, hill cutting, deforestation, and unplanned human settlements act as contributing factors behind the landslide disaster. Extensive analysis of the geotechnical facts has been carried out, and an attempt is made to pinpoint the cause. A finite element modeling was conducted using PLAXIS 2D to investigate the failure mechanism. The numerical modeling results have suggested that most of the hill slopes were susceptible to failure after heavy rainfall. A conclusion is drawn that the landslides were triggered by incessant rainfall infiltrating into the subsoil, which led to a notable increase in its degree of saturation and a simultaneous reduction in suction and shear strength of the soil.