Spectrally selective absorbers have received considerable interest due to their applications in thermophotovoltaic devices and as solar absorbers. Due to extreme operating conditions in these applications, such as high temperatures, thermo-mechanically stable and broadband spectrally selective absorbers are of interest. This paper demonstrates anisotropic random rough surfaces that provide broadband spectrally selective absorption for the thermo-mechanically stable Tungsten surfaces. Anisotropic random rough surface has different correlation lengths in the x- and y-directions, which means their topography parameters have directional dependence. In particular, we demonstrate that spectral absorptance of Tungsten random rough surfaces at visible (VIS) and near-infrared (NIR) spectral regions are sensitive to correlation length and RMS height variations. Our results indicate that by optimizing random rough surface parameters, absorption values exceeding 95% can be obtained. Moreover, our results indicate that anisotropic random rough surfaces broaden the bandwidth of the high absorption region. It is shown that in VIS and NIR regions, the absorption enhancements of up to 47% and 52% are achieved for the isotropic and anisotropic rough surfaces, respectively.
Although black silicon is utilized in a wide range of applications due to its broadband spectral emission and absorption, the underlying electromagnetic mechanisms are not well explored. In this study, the underlying phenomena that are responsible for these enhanced spectral features are investigated. The absorption spectra of the black silicon with random textures are analyzed, and the electromagnetic mechanisms that drive elevated absorption are explored. Our findings reveal that two separate electromagnetic phenomena occur in the textures, effective wavelength matching and waveguide modes. Detailed analysis reveals that the occurrence condition of those phenomena is highly dependent on the dimensions of the textures in the transverse direction. The effect of the texture dimensions and doping concentration both on absorption characteristics and physical phenomena is analyzed in detail. The findings of this study explain the absorption mechanisms of black silicon observed in experimental studies, which can lead to designer materials with rough surfaces for the desired spectral emissivity.
6 August 2024 in Journal of the Optical Society of America B
Vanadium dioxide (VO2) has attracted extensive attention due to its reversible transition from the insulator to metal phase at a critical temperature of 68°C. Below the critical temperature VO2 transmits the infrared radiation in the insulator phase, whereas above the critical temperature VO2 reflects the infrared portion of the incident radiation. However, smart surface interfaces for high-temperature emitter surfaces require the opposite functionality within the 1–3 µm spectral range. Here, we demonstrate that a core–shell structure, composed of VO2@Si, which is deposited on a thin layer of Ag, achieves the inverted optical functionality within the 1–3 µm spectral range, making it ideal as smart interfaces for radiative heat applications as high-temperature emitters. The proposed material architecture also increases the thermal stability of VO2 in addition to enhancing its optical properties in near-infrared region. The results were obtained using numerical simulations. Our results indicate that in its metallic state, the core–shell structure with metallic underlayer promotes efficient absorption in the near-infrared spectrum. On the other hand, in its insulating state dielectric resonances within the core–shell structure along with the metallic underlayer, resulting in increased reflection, offer inverse optical functionalities. Our findings present a significant step toward designing dynamic filters that can efficiently capture and respond to changing conditions in the near-infrared spectrum.