The present study evaluates the application of class F fly ash as a partial replacement of binder in concrete. The compressive strength of the fly ash samples showed low early compressive strength comparing to the control samples. However, due to pozzolanic reaction strength was improved gradually over a longer period of time, whereas control samples stopped the strength growth after 56-d of curing. The drying shrinkage was reduced with the increment of fly ash content in the mix. The inclusion of fly ash as a binder reduced the porosity of the concrete. As a result, the fly ash concrete exhibited lower water sorptivity and chloride permeability. Furthermore, a significant drop of sorptivity and chloride permeability was observed for fly ash concrete between the curing period of 28â180 days. Microstructural morphology of fly ash samples was investigated to evaluate the reason behind the improved durability characteristics. Keywords: Fly ash, Compressive strength, Drying shrinkage, Permeable void, Water sorptivity, Chloride permeabilit
1 July 2018 in Resources, Conservation and Recycling
Automatic construction systems have become the focus of the construction industry and research projects worldwide. Numerous technologies involving 3D printing (3DP) of concrete elements have been developed, and their application in construction projects has been growing. The 3DP in concrete construction is increasing due to its freedom in geometry, rapidness, formwork-less printing, low waste generation, eco-friendliness, cost-saving nature, and safety. Development of 3DP is not only limited to the earth but also gaining attention for building habitats in space. This study aims to present the technical, socio-economical, and environmental aspects related to 3DP of concrete structures for a systematic summation of the technology, guidelines, applications, challenges, and prospects of future research and market in the construction industry. This comprehensive review shows that challenges involved in 3D concrete printing should be analyzed further by researchers to enhance mechanical performance, durability, and sustainability and establish appropriate standard guidelines for printing structures.
1 June 2017 in Construction and Building Materials