The active/passive -switching operation of a 2 μm -cut Tm,Ho:YAP laser was experimentally demonstrated with an acousto-optical – saturable absorber mirror. The active -switch laser was operated for the first time, to the best of our knowledge, with an average output power of 12.3 W and a maximum pulse energy of 10.3 mJ. The passive -switch laser was also the first acquired with an average output power of 3.3 W and per pulse energy of 23.31 μJ, and the beam quality factors of and were measured at the average output power of 2 W.
28 November 2018 in Physica Status Solidi (RRL) – Rapid Research Letters
In this paper, we demonstrate the continuous-wave and acousto-optical Q-switched performance of diode-pumped slab Ho:(Sc0.5Y0.5)2SiO5 (Ho:SYSO) laser at 2.1 µm for the first time. Two 1.91-µm laser diodes were used to pump the Ho:SYSO crystal. With a wing-pumping structure, at absorbed pump power of 44.7 W, the continuous wave slab Ho:SYSO laser produced 20.7 W maximum output power at 2097.9 nm, resulting in a slope efficiency of 53.1% with respect to the absorbed pump power. In the Q-switched regime, the slab Ho:SYSO laser produced up to 3.4 mJ pulse energy with 20 ns minimum pulse width at pulse repetition frequency of 5 kHz, corresponding to a peak power of 170 kW.
In this paper we present a high power long-wave infrared ZnGeP2 (ZGP) optical parametric amplifier (OPA) pumped by a 2097-nm Q-switched Ho:YAG laser with pulse repetition frequency of 20 kHz. When the incident Ho pump power was 116.0 W, the maximum average output power of 11.4 W at 8.3 μm was achieved in the ZGP OPA. The optical conversion efficiency from Ho to long-wave infrared was about 9.8%. The ZGP OPA produced 30.4 ns long-wave infrared laser pulse. The beam quality factor (M2) of ZGP OPA was measured to be about 2.9 at the maximum average output power.