Recently, phase change materials (PCMs) are acquiring much attention for the overall enhancement of photovoltaic (PV) systems' performance, because of their extraordinary property in temperature management. Many researchers have been incorporating PCMs in PV systems. However, the tested materials are principally organic PCMs. In this review, a comprehensive literature of PV systems with utilization of inorganic PCMs is introduced. Salt hydrates are the focus materials. They, in general, have comparative properties as organic PCMs and are better from safety and environmental standpoints. The characterization, properties, and applications of the salt hydrates in PV‐PCM research are discussed in this paper. Indeed, even most research shows promising outcomes, there is still need in data collection for more detailed and accurate system performance evaluation. Therefore, the real‐life application of this type of PV‐PCM system is still a long way from clear due to the discovered challenges. Finally, the possibilities of future research on PV‐PCM systems are highlighted, innovative technologies are to be discovered and addressed to defeat the current issues including system reliability and economic attainability.
Exploration of clean and renewable energy materials is necessary due to the coming energy crisis and environmental problems. Solar energy is one of the favorable energy sources because of the continuous energy reservoir and its affluence. Silicon-based solar devices are expensive due to their complicated production process, which limits this technology for urban and other commercial applications. Among the third generation of solar cells, Dye-Sensitized Solar Cells (DSSCs) have attracted widespread attention as potential cost-effective alternatives to silicon-based solar cells. In this paper, the commercializing potential of the DSSCs is investigated. A module is introduced where the materials, equipment, and distribution of direct manufacturing costs are calculated. The manufacturing costs and the Levelized Cost of Energy (LCOE) of these DSSCs for a system lifetime of 25 years were determined to be USD 22.40 per m2 and USD 0.0438 per kWh and the module price of this technology is USD 0.18 per W and the total installed system cost is USD 0.88 per W in Kansas which suggest that this PV technology could challenge other leading PV technologies.
26 March 2019 in International Journal of Photoenergy
Graphite with a single atomic layer known as graphene shows great capability in energy conversion and storage devices. Dye-sensitized solar cells (DSSCs) have attracted intense interests due to offering high photo-to-electric conversion efficiencies. DSSCs are built from a photoelectrode (a dye-sensitized nanocrystalline semiconductor), an electrolyte with redox couples, and a counterelectrode. In this review article, we outline the strategies to enhance the efficiency and reduce the cost by introducing graphene into the DSSCs as the photoelectrode. First, the development of DSSCs and the properties of graphene are briefly described. Then, the applications of graphene-based materials for photoelectrodes (transparent electrode, semiconductor layer, and dye sensitizer) in DSSCs are deeply discussed. Finally, an outlook for graphene materials in DSSCs is provided.
Perovskite solar cells (PSCs) are a rising star in the photovoltaic industry, which achieved an enormous breakthrough in terms of efficiency from an initial 3.8% in 2009 to 25.7% in 2021. The major challenge to bring perovskite solar cells commercially available is the poor long-term device stability. The defects in perovskite and energy loss originating from charge recombination limit the efficiency of perovskite solar cells. Carbon–polymer composites, which feature superb electrical conductivity, outstanding carrier mobility, remarkable flexibility and superior heat and moisture stability, have attracted considerable attention to tackle these issues. With their multifunctional properties, carbon–polymer composites can play various roles in almost every component in the perovskite solar cell architecture. In this review article, recent progress concerning the utilization of carbon–polymer composites in different components in PSCs (i.e., perovskite additives, electrodes, encapsulation layers and charge transport layers) is comprehensively overviewed. Then, future research directions and opportunities toward high-performance perovskite solar cells utilizing carbon–polymer composites are presented.