This work aimed to use low-cost residual cocoa shell biomass for the preparation of activated carbon with different amounts of SiO2 nanoparticles using the coprecipitation method. The use of residual plant biomass seeks to strengthen the challenges of the bioeconomy in the generation of value-added products for the agro-industry. Subsequently, the adsorption capacity of phenol and 3,4-dimethoxybenzyl alcohol as representative species of persistent organic pollutants was quantified. The chemical activation of the carbon was carried out at 480 °C during 30 min with a 1.5 phosphoric acid (H3PO4) impregnation ratio. The activated carbons were characterized by Fourier transform infrared spectroscopy (FTIR), showing the presence of functional groups associated with substances such as phenols, carboxylic acids, aromatic rings, and SiO2. Also, activated carbons were structurally characterized with scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS), finding that the granules had structured surfaces but with irregular size and disordered channels, which facilitates the impregnation of SiO2 nanoparticles onto the activated carbon surface. The adsorption study of the organic compounds was carried out using UV–Vis spectroscopy. The adsorption isotherms, which were adjusted to the Langmuir, Freundlich and Temkin models, were determined with correlation coefficients of 0.9835, 0.9885 and 0.987. On the other hand, the adsorbent materials achieved removal percentages around 97.9% and 97.8% for phenol and 3,4-dimethoxybenzyl alcohol, respectively. The results showed that activated carbons with SiO2 nanoparticles increased the specific surface area by up to 20%. Therefore, this property allows a greater interaction of contaminants at the time of adsorption. Graphical abstract
Enhanced recovery methods are an important stage in the oilfield development and exploitation program. They allow generating an increase in production related to the decrease of the remaining oil in the reservoir, which was not possible to remove in previous production schemes. Among them, steam injection is one of the methods used, whose main objective is to reduce the viscosity of the crude oil. In the literature there are researches where is evident an interaction between the steam and the crude oil in the reservoir, giving way to the occurrence of chemical reactions called Aquathermolysis. This transformation is a chemical result that occurs at temperatures between 200 to 325°C typical for steam injection. However, the investigations have been focused more on the fluid-fluid interaction than the rock-fluid synergy. The present work aims to better understand the synergy generated in the fluid-rock interaction through a systematic review of the research found in the literature associated with the use of rock fragments, minerals, or porous media in steam injection conditions. For analyzing the data, a descriptive bibliometric study was made with the selected studies where a rock sample was used. As a result, the addition of the mineral and rocks over the reactions generates a catalytic effect observed in the physical and chemical crude oil properties changes. This additional effect is generated for the presence of some minerals in the rock sample and this behavior could change according to its composition. Also, the gas production and its variation under different operational parameters are evidence of rock presence benefits over the process.
26 January 2024 in Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy
The growing availability of vacuum residues has provoked the development of studies that may improve refining processes to increase capacity conversion. Therefore, conducting a detailed analysis on the trend of the physicochemical properties of representative fractions is necessary. In this work, a set of vacuum residues were fractionated using n-hexane as a supercritical fluid and the molecular distillation process. The results show that the increase in density, micro-carbon content and molecular weight in the extractable fractions is associated with their SARA compositional. As a result, density determination for these extractable fractions by standard methodologies, such as ASTM D70, has shown limitations for samples with densities higher than 1.0879 g/ml. To measure the density of vacuum residues and their fractions, a density dilution methodology was conducted, using toluene as a solvent. In this study, 87 fractions obtained from different vacuum residues and processed with n-hexane and molecular distillation were selected. The proposed dilution methodology allows measuring densities with repeatability and reproducibility values of 0.0031 and 0.0061 g/g/ml, respectively. The average boiling point (Tb50) of vacuum residues and their fractions was correlated with density and molecular weight, to estimate their quality. The correlations of density and average boiling point properties Tb50 exhibited R2 correlation coefficients of 0.9949 and 0.9908 with P values less than 0.0031. The values of these statistical parameters show that the developed correlations have a confidence level of 95%.