We present a detailed study of permalloy (Ni80Fe20) nanostructures with variable shape (disk, cylinder and sphere) for magnetic hyperthermia application, exploiting hysteresis losses for heat release. The study is performed modifying nanostructure aspect ratio and size (up to some hundreds of nanometres), to find the optimal conditions for the maximization of specific heating capabilities. The parameters are also tuned to guarantee negligible magnetic remanence and fulfilment of biophysical limits on applied field amplitude and frequency product, to avoid aggregation phenomena and intolerable resistive heating, respectively. The attention is first focused on disk-shaped nanostructures, with a comparison between micromagnetic simulations and experimental results, obtained on nanodisks still attached on the lithography substrate (2D array form) as well as dispersed in ethanol solution (free-standing). This analysis enables us to investigate the role of magnetostatic interactions between nanodisks and to individuate an optimal concentration for the maximization of heating capabilities. Finally, we study magnetization reversal process and hysteresis properties of nanocylinders (diameter between 150 nm and 600 nm, thickness from 30 nm up to 150 nm) and nanospheres (size between 100 nm and 300 nm), to give instructions on the best combination of geometrical parameters for the design of novel hyperthermia mediators.
A micromagnetic model is used to evaluate the heating properties of Fe3O4 nanoparticles versus size, concentration, aggregation order, and AC magnetic field parameters. The obtained data can guide nanoparticle design in view of hyperthermia application.
The ability of magnetic nanoparticles (MNPs) to transform electromagnetic energy into heat is widely exploited in well-known thermal cancer therapies, such as magnetic hyperthermia, which proves useful in enhancing the radio- and chemo-sensitivity of human tumor cells. Since the heat release is ruled by the complex magnetic behavior of MNPs, a careful investigation is needed to understand the role of their intrinsic (composition, size and shape) and collective (aggregation state) properties. Here, the influence of geometrical parameters and aggregation on the specific loss power (SLP) is analyzed through in-depth structural, morphological, magnetic and thermometric characterizations supported by micromagnetic and heat transfer simulations. To this aim, different samples of cubic Fe3O4 NPs with an average size between 15 nm and 160 nm are prepared via hydrothermal route. For the analyzed samples, the magnetic behavior and heating properties result to be basically determined by the magnetic single- or multi-domain configuration and by the competition between magnetocrystalline and shape anisotropies. This is clarified by micromagnetic simulations, which enable us to also elucidate the role of magnetostatic interactions associated with locally strong aggregation.
Magnetic nanodisks have been recently proposed as biomedical tools for therapeutics at the nanoscale level, with a special focus on hyperthermia for cancer cure. Here we present a detailed study of permalloy nanodisks to be used in alternative to superparamagnetic iron oxide nanoparticles, as efficient heating agents that release heat via magnetic hysteresis. A micromagnetic modeling analysis is carried out to identify sizes and ac field parameters that maximize the specific loss power (SLP), guaranteeing the fulfillment of biophysical constraints (Hergt–Dutz limit) and vortex state at remanence (reduced agglomeration effects). The highest SLP (790 W g−1) is found for 100 nm diameter and 20 nm thickness nanodisks, excited at a frequency of 75 kHz. Further analysis elucidates the influence of magnetostatic interactions and local nanodisk‐field orientation on the SLP of nanodisk clusters, which originate from the deposition in target tissues. At high concentrations, magnetostatic interactions can lead to a reduction of 40–50% in the hysteresis losses. From thermal simulations, we finally demonstrate that in a murine model temperature increments comparable to that obtained in calorimetric measurements under quasi‐adiabatic conditions can be achieved only by using an order of magnitude larger dosage of nanodisks, due to blood perfusion effects.
19 May 2024 in International Journal of Thermal Sciences