Central apex of bifurcations has higher specific fracture energy in TR fracture system than that of four sampling locations. This could be due to higher density and interlocked grain formation. Forks are one of the important biomechanical structures in trees because of their potential vulnerability to splitting. Many researchers have investigated the strength and stiffness properties of tree forks, but very little is known about the toughening mechanism within tree forks. In this study, the specific fracture energy (Gf, Jm−2) of forks of hazel (Corylus avellana L.) was investigated in the RT (Radial-Tangential) and TR (Tangential-Radial) fracture systems using double-edge-notched tensile tests. Sample Gf values were measured at between the central apex of bifurcations, at the side apices of bifurcations, in the parent stems and in the two branches of forks. The fracture surfaces were analysed by Scanning Electron Microscopy (SEM), and the wood density was determined. Gf was found to be considerably greater at the central apex of a bifurcation than in other sampling locations. Surprisingly, Gf of TR was greater than Gf of RT at the central apex, while the other four locations showed greater Gf values in their RT fracture systems. The density of the central apex of bifurcations was found to be around 22% greater than elsewhere. In addition, it was shown that there was a more tortuous and interlocked wood grain formation at the central apex of bifurcations. The combination of higher density and tortuous grain structure provides reinforcement at the central apex.
It is usually assumed that ‘fire hardening’ the tips of spears, as practised by hunter–gatherers and early Homo spp., makes them harder and better suited for hunting. This suggestion was tested by subjecting coppiced poles of hazel to a fire-hardening process and comparing their mechanical properties to those of naturally seasoned poles. A Shore D hardness test showed that fire treatment slightly increased the hardness of the wood, but flexural and impact tests showed that it reduced the strength and work of fracture by 30% and 36%, respectively. These results suggest that though potentially slightly sharper and more durable, fire-hardened tips would actually be more likely to break off when used, as may have been the case with the earliest known wooden tool, the Clacton spear. Fire might first have been used to help sharpen the tips of spears, and fire-hardening would have been a mostly negative side effect, not its primary purpose.
Despite the importance of wooden tools for early man, and the development of woodworking in the Mesolithic and Neolithic culture, there has been surprisingly little research on how wood can be worked by stone tools or how wooden handles for composite tools were designed. This paper outlines an approach based on an understanding of the structure and mechanical properties of wood. The cell arrangement in wood makes it far less stiff, strong and tough across the grain, especially tangentially. This makes it hard to harvest wood or break it into lengths because it splits down its centre rather than breaking right across. Fortunately, this also makes wood easy to split along the grain, especially radially through its centre into sections and planks. A model of the splitting process predicted that wood is best split using blunt, broad but smooth wedges, as these would use less energy and would be less likely to get stuck in the wood. The predictions were verified in tests in which hazel coppice poles were split using wedges of contrasting angle, width and surface texture. The results help explain the change from the flaked flint Mesolithic tranchet axes to the broader polished stone Neolithic axe and adze heads. However, further experiments are also needed cutting wood obliquely to test this hypothesis. The splitting model also helps to understand the design of socketed axe hafts. Failure usually occurs when the handles split at the distal and proximal ends of the socket. To prevent this, handles are best designed with the growth rings parallel to the socket, and with an expanded head, especially with flanges on the distal and proximal ends of the socket. These designs are seen in some of the Neolithic axe handles that have been found in Britain, including the Etton, Ehenside and Shulishader axes. More experimental research is needed to understand the optimal way of hafting axe heads.
Roland Ennos argues that the abilities of the great apes to cope in the dangerous mechanical environment of the forest canopy are part of the human species' intellectual inheritance and are intimately connected with our abilities as physicists.