Local government built the monitoring project to know seawall performance and ensure its safety in Shanghai Pudong New Area. Up to now, monitoring data of some important monitoring items including tidewater level, seepage pressure, rainfall, wave, deformation, etc., have been collected. The monitoring system is introduced here. Furthermore, the data analysis methods have been studied particularly because the seawall works in a complex special environment. The rules and relationship within seepage pressure, tidewater, and rainfall are presented, and the time distance between tidewater and seepage pressure curves are confirmed by statistical distance analysis. To do quantificational analysis of seawall performance, two methods based on statistical theory and general regression neural network are used to establish monitoring models considering the main effect factors. Instances show the models can achieve good fitting and forecasting results of seawall seepage pressure. Application experiences are also presented.
In the field of cold bending, it is necessary to use ball mandrels, especially to bend thin-walled tubes with a small radius. However, the bending process with a ball mandrel is complex and expensive, and it is easy to jam the core ball inside the tube. To solve these issues, we designed two kinds of hollow non-ball mandrel schemes with low stiffness that were suitable for the small radius bending of thin-walled tubes. We evaluated the forming quality of cold bending numerically and the influence of the hollow section length and thickness on the forming indices. Our results showed that the thickness of the hollow section has a greater influence on forming quality than the length. As the hollow section’s thickness increased, the wrinkling rate first declined by approximately 40% and then increased by above 50%. When the thickness was 11 mm in scheme 1 and 13 mm in scheme 2, the wrinkling rate reached minimum values of 1.32% and 1.50%, respectively. As the hollow section’s thickness increased, the flattening rate decreased by more than 60% and the thinning rate increased by about 40%. A multi-objective optimization of forming indices was carried out by ideal point method and grey wolf optimizer. By comparing the forming results before and after optimization, the feasibility of using the proposed hollow mandrel was proved, and the hollow mandrel scheme of standard cylinder is therefore recommended.
Seepage pressure is important for sea wall safety monitoring. Analyzing its survey data correctly is necessary and very useful to ensure the safety of sea walls. Sea walls work in complex environment with important functions. Because of the effect of tidewater and the rain sensitivity of building materials, sea wall seepage pressure has special variation patterns that must be studied particularly. In order to comprehend the seepage rule and the relationship between it and influencing factors, rainfall amount and its duration and tidewater and its action time have been analyzed according to survey data. A former tidewater factor of seepage pressure is confirmed by statistical distance analysis, and a new rain effect factor is presented. Furthermore, in order to describe and forecast sea wall seepage pressure with high accuracy, the causal monitoring models are developed on the basis of influencing factor analysis. Shanghai Pudong sea wall seepage pressure monitoring results have been introduced. Above methods have been applied successfully in Pudong sea wall project in Shanghai, China, and the models have good precision in simulation and forecast.