In this paper, we have presented an equation for estimating the gain of a Fabry-Perot cavity (FPC) antenna with a finite dimension. When an FPC antenna has an infinite dimension and its height is half of a wavelength, the maximum gain of that FPC antenna can be obtained theoretically. If the FPC antenna does not have a dimension sufficient for multiple reflections between a partially reflective surface (PRS) and the ground, its gain must be less than that of an FPC antenna that has an infinite dimension. In addition, the gain of an FPC antenna increases as the dimension of a PRS increases and becomes saturated from a specific dimension. The specific dimension where the gain starts to saturate also gets larger as the reflection magnitude of the PRS becomes closer to one. Thus, it would be convenient to have a gain equation when considering the dimension of an FPC antenna in order to estimate the exact gain of the FPC antenna with a specific dimension. A gain versus the dimension of the FPC antenna for various reflection magnitudes of PRS has been simulated, and the modified gain equation is produced through the curve fitting of the full-wave simulation results. The resulting empirical gain equation of an FPC antenna whose PRS dimension is larger than 1.50 has been obtained.

A low-profile high-efficiency transmitarray antenna (TA) for beamforming applications is proposed and investigated in this paper. The partial H-plane waveguide slot array antenna is employed as the compact low-profile feeding structure of the beamforming TA. The designed TA can achieve a high taper efficiency due to the multi-array sources and the compactness of the partial H-plane waveguide. Moreover, the proposed TA can inherently have a high spillover efficiency because the frequency selective surface (FSS) for beamforming is located just above the radiating slot. The FSS with a transmission phase variation of 2π is designed by a square patch array and used to manipulate the wave-front of the transmitted electromagnetic wave instead of a complicated feed network and phase shifters. To verify its beamforming characteristic, three types of FSSs to operate a forming angle of −40°, −20°, 0°, +20°, and +40° are designed at 12 GHz. The distance between the FSS and the slot array antenna is 0.1λ₀, and the aperture efficiency is measured to be about 69%. The measured results, such as the reflection coefficient and the far-field radiation pattern, are in good agreement with the simulated results. From the measured results, the proposed TA is confirmed to have good beamforming characteristics and high aperture efficiency.

In this letter, a novel parallel coupled bandstop filter (BSF) using a double negative (DNG) coupled transmission line is presented. Between microstrip as a double positive (DPS) transmission line and mushroom structure as a DNG transmission line, strong coupling broadly arises in the cross range of dispersion curves of isolated microstrip and mushroom structure because of a complex propagation constant in the cross range. Strong coupling inhibits wave propagation, so that this kind of structure can be utilized as a BSF. This BSF utilizes coupled transmission line instead of coupled resonator, resulting in broad bandwidth (>30%), sharp-rejection, and high rejection level. The strong coupling between the DPS and DNG transmission line makes it possible to shorten the coupling length, resulting in compact size

Rain attenuation based on the drop size distribution (DSD) with different rainfall rates (R) at low THz frequencies is investigated in this paper. The rain attenuation is calculated using the DSD measured for one year and the extinction cross-section (ECS) by the Mie scattering theory. Moreover, the obtained specific rain attenuation is verified by the empirical model using the measurement system consisting of a transmitter, a receiver, and weather measurement units. We measured the received power against the uniform transmitted power at 240, 270, and 300 GHz on the rooftop of the National Radio Research Agency (RRA) in Korea during the same period as the DSD measurement period. After curve fitting by regression analysis, we compared both rain attenuations obtained in two methods with the recommendation International Telecommunication Union Radiocommunication Sector (ITU-R) P.838-3. The root mean square errors (RMSEs) of the DSD model are 2.8977, 2.8646, and 2.8331 at 240, 270, and 300 GHz, respectively. The calculated result using the Mie scattering and the measured DSD methods shows the best fit to the data of the ITU-R recommendation for a rainfall rate of up to 5 mm/h. On the other hand, the empirical results using the T/Rx antenna system are slightly higher compared to the data of the ITU-R recommendation. As the rainfall rate increases, the difference between our results and ITU-R recommendation increases. This study will be useful for predicting rain attenuation for terrestrial wireless links operating at low THz frequencies.