A novel design of a neutralizer-free plasma thruster is proposed. This setup features a capacitively coupled RF discharge for plasma generation combined with a magnetic nozzle configuration for acceleration. Characteristics of the plasma plume and ions flux are investigated with the help of emissive probes and retarding potential analyzers (RPA). Essential parameters of the thruster like ions energy, ions flux, utilization efficiencies, and thrust are estimated. The investigated system produces a beam of ions accelerated to an energy of 10 eV when operated at power levels of ~20 W and a mass flow of 1.2 mg/s. The ion energy coincides with the potential drop in the plasma plume indicating that the acceleration takes place due the formation of an ambipolar electric field in the expanding plasma. The design is compared to the data available of other similar thrusters.
The paper presents the results of the first experiments on the implementation of the concept of electric propulsion thrusters that use atmospheric gases as propellant. Such thrusters can be used to...
Thermal propagation events are characterized by fire and thick black smoke, leading to propagation methods with a focus on preventing heat transfer and optimizing gas flow. Yet little attention is being paid to the electric conductivity of the gas, leading to possibly unexpected battery casing openings due to lightning arcs as well as potentially providing the minimum ignition energy. This gas composition (omitting particles) was used at different temperatures and pressures in a lightning arc test bench, leading to the Paschen curve. Using a mini-module cell setup, filtered venting gas was flowed through another lightning arc test bench, allowing for in situ measurements.
1 January 2018 in Известия Российской академии наук. Энергетика
The lifetime of gridded ion engines is primarily limited by erosion of the ion optics system. Despite extensive research, the availability of quantitative, spatially resolved erosion data under long-duration operation remains limited, particularly for internal erosion features such as aperture barrel erosion. This work presents a quantitative characterisation of erosion in a three-grid ion optics system using a combination of scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM–EDX) and micro-computed tomography (micro-CT). The micro-CT approach, previously explored in preparatory studies within the same programme frame, is here applied to enable non-destructive, volumetric assessment of eroded ion optics after long-duration operation. A dedicated experimental design incorporating three distinct aperture regions within a single ion optics system allows direct comparison of erosion behaviour under identical plasma and facility conditions during a 1000 h endurance test with xenon propellant. Erosion characterisation was performed at multiple time points (0, 100, 500, and 1000 h), combining surface and volumetric diagnostics to resolve both edge and barrel erosion processes. The results show consistent trends in erosion behaviour across different aperture regions, indicating a systematic dependence on local geometry. Quantitative analysis reveals distinct erosion modes, including significant barrel erosion and configuration-dependent edge evolution. SEM–EDX analysis confirms inter-grid material transfer, while no redeposition of facility materials was detected above the sensitivity limits of the method. The combined diagnostic approach is validated by the consistency between SEM and micro-CT observations, demonstrating its capability for non-destructive, quantitative assessment of ion-optics erosion. The presented results establish a high-fidelity baseline dataset and provide experimental insight into erosion mechanisms and material transport within the extraction region under realistic operating conditions.