Stainless steel 316L is a widely used structural material in the nuclear industry because of its excellent corrosion resistance and mechanical properties. However, very little research can be found on its viscoplastic behaviour and microstructure evolution at warm and hot deformation conditions, which hinder the possible application of advanced manufacturing technologies for producing complex parts, such as superplastic forming or hydroforming. The aims of this study are to explore stainless steel 316L’s viscoplastic behaviour, to determine its strain rate sensitivities, and to reveal its underlying microstructure evolution; this will allow appropriate manufacturing (forming) technologies and the optimal forming condition to be determined. Hence, isothermal tensile tests at 700 °C, 800 °C, 900 °C, and 1000 °C at strain rates of 0.01 s−1 and 0.001 s−1 have been conducted. Moreover, the corresponding microstructure evolution, including the grain orientation and geometrically necessary dislocation density, has been revealed by the electron backscatter diffraction method. The data show the viscoplastic behaviour of stainless steel 316L under various thermomechanical deformation conditions and how microstructure evolution influences the viscoplastic flow stress.
During plastic deformation, the change of structural states is known to be complicated and indeterminate, even in single crystals. This contributes to some enduring problems like the prediction of deformed texture and the commercial applications of such material. In this work, plane strain compression (PSC) tests were designed and implemented on single crystal pure aluminum to reveal the deformation mechanism. PSC tests were performed at different strain rates under strain control in either one-directional or two-directional compression. The deformed microstructures were analyzed according to the flow curve and the electron back-scattered diffraction (EBSD) mappings. The effects of grain orientation, strain rate, and strain path on the deformation and mechanical response were analyzed. Experimental results revealed that the degree of lattice rotation of one-dimensional compression mildly dependents on cube orientation, but it is profoundly sensitive to the strain rate. For two-dimensional compression, the softening behavior is found to be more pronounced in the case that provides greater dislocations gliding freeness in the first loading. Results presented in this work give new insights into aluminum deformation, which provides theoretical support for forming and manufacturing of aluminum.