In this work, NdCoO₃ (NCO), Nd_0.8Sr_0.2CoO₃ (NSCO) and Nd_0.9Ca_0.1CoO₃ (NCCO) perovskite cobaltites were synthesised by mechanical alloying method. Structural evolutions, magnetic and electrical properties of these perovskite were systematically examined through X-ray diffraction (XRD), scanning electron microscopy with energy-dispersive X-ray detection (SEM-EDX), transmission electron microscopy (TEM), differential scanning calorimetry (DSC), vibration sample magnetometer (VSM) and impedance analyser (IA). The XRD and SEM results revealed that the microstructure of the perovskite materials changed during mechanical alloying. The average crystallite size of the perovskite materials was calculated by Debye Scherrer equation and was confirmed by TEM, and it was determined ~19 nm. From the VSM results, the all perovskites had soft ferromagnetic properties. IA measurements showed that relatively dielectric constants of the perovskites decreased with increasing frequency. Therefore, for the first time, nanostructured NCO, NSCO and NCCO perovskites exhibiting good properties were produced in only two steps which are milling and heating.

The significance of radiation shielding is on the rise due to the expanding areas exposed to radiation emissions. Consequently, there is a critical need to develop metal alloys and composites that exhibit excellent capabilities in absorbing neutron and gamma rays for effective radiation shielding. Low-density Ti-based alloys with controlled structural properties can be used for radiation protection purposes. The present research investigates boron-doped Ti-based alloy, Ti₅₀Cu₃₀Zr₁₅B₅, which is synthesized by arc melting technique, and its structural, mechanical properties, neutron, and gamma-ray transmission rate were investigated. Monte Carlo N-Particle simulation (MCNP6.2) code is used for calculating the Thermal (2.53 $\times$ 10⁻⁸ MeV) and fast (2 MeV) neutron transmission ratio (I/I₀) dependent on the sample thickness. The Phy-x program is employed for calculating the gamma-ray LAC, MAC, HVL, TVL, and MFP values. The calculated neutron shielding performance parameters of Ti₅₀Cu₃₀Zr₁₅B₅ alloy were compared with materials in the literature. It was found that Ti₅₀Cu₃₀Zr₁₅B₅ alloy demonstrated impressive physical characteristics, suggesting that it can serve as a promising alloy for neutron and gamma-ray shielding applications.