Dibyashree Shrestha

Dr. Dibyashree Shrestha


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 September 2021 in Heliyon
Verified
Journal Article
Open access
DSDibyashree Shrestha
Dibyashree Shrestha
ARA. Rajbhandari
A. Rajbhandari
This study focuses on the effects of activating agents on the physical and electrochemical properties of activated carbon (AC) electrodes, fabricated from wood dust of Shorea robusta. Three different activating agents namely H3PO4, KOH and Na2CO3 have been used to prepare ACs, which were named as: Sr–H3PO4, Sr–KOH and Sr–Na2CO3. The ACs were characterized by TGA/DSC, XRD, Raman, SEM, FTIR and BET. All the as prepared ACs were found to be amorphous in nature. The oxygen surface functionality was developed at the surface. The surface area of Sr–H3PO4, Sr–KOH and Sr–Na2CO3 were found to be 1269.5 m2/g, 280.6 m2/g and 58.9 m2/g respectively. The activated carbon-electrodes were then fabricated and supercapacitive performances were evaluated by “three electrode system” in aqueous 6M KOH using cyclic voltammetry (CV), galvanostatic charge discharge (GCD) and electrochemical impedance spectroscopy (EIS).The GCD performed at 1A/g revealed the specific capacitance values were 136.3 F/g, 42.2 F/g and 59.1 F/g for Sr–H3PO4, Sr–KOH and Sr–Na2CO3-electrodes, respectively. Energy density for Sr–H3PO4 electrode was found to be 3.0 Wh/kg at 99.6 W/kg power densities. Moreover, it also displayed imposing cyclic stability of about 96.9 %, 89.5 % and 78.5 % after 1000 cycles of charge/discharge respectively. The overall electrochemical performance of Sr–H3PO4 showed outstanding supercapacitive performances demonstrating the high possibility of this material to be used for the EDLC application in supercapacitive energy storage. The Nyquist plot also showed the lowest internal resistance of about 0.4 Ω for Sr–H3PO4 electrode.


8 February 2024 in Heliyon
Verified
Journal Article
Open access
DSDibyashree Shrestha
Dibyashree Shrestha
This study explored the impact of carbonization temperature (400–700 °C) on the structural and electrochemical performances of H3PO4-activated carbons (ACs) for supercapacitor applications. Advanced characterization techniques, including XRD, Raman, SEM, TEM, FTIR, and BET analysis revealed the structural properties of the ACs. Electrochemical performance was evaluated through cyclic voltammetry (CV), galvanostatic charge discharge (GCD), and electrochemical impedance spectroscopy (EIS) tests. The AC carbonized at 400 °C (AC-400 °C) exhibited outstanding performance with a surface area of 1432.4 m2 g-1 and its electrode delivered a specific capacitance of 183.4 Fg-1 in 6 M KOH electrolyte. It demonstrated remarkable cycle stability (94.3 % retention) at 3 Ag-1 and an energy density (ED) of 4.2 Whkg−1 at a power density (PD) of 137 Wkg-1. Combining AC-400 °C with MnO2 in a 1:1 ratio (AC:MnO2-400 °C) further boosted the electrochemical performance. This composite electrode delivered a significantly higher specific capacitance of 491.3 Fg-1, outstanding cyclic stability of 99.6 % retention at 3 Ag-1, and an exceptional ED of 25.3 Whkg−1 at a PD of 187.3 Wkg-1, surpassing that of AC-400 °C by more than six-fold. This remarkable enhancement highlighted the immense potential of AC-MnO2 composites for high-performance supercapacitors. This study identified 400 °C as the optimal carbonization temperature for maximizing the electrochemical performance of AC electrodes. More importantly, it demonstrated the significant potential of AC:MnO2-400 °C composites for applications in high-performance supercapacitors.

30 October 2023 in Heliyon
Verified
Journal Article
Open access
DSDibyashree Shrestha
Dibyashree Shrestha
This research investigates the utility of functionalized porous carbon (FPC), derived from the waste wood of Alnus nepalensis. It demonstrates FPC's dual suitability as a versatile component for energy storage systems, specifically supercapacitors, and its impressive capacity to adsorb malachite green (MG) dye from industrial wastewater. The synthesis of FPC occurred through a controlled two-step process: initial activation of wood powder with H3PO4, followed by carbonization at 400 °C for 3 h in a tube furnace. To comprehensively evaluate the material's attributes, multiple analytical methods were employed: Brunauer-Emmet-Teller (BET) analysis, Transmission Electron Microscopy (TEM) imaging, X-ray Diffraction (XRD) analysis, Raman spectroscopy, and Fourier Transform Infrared Spectroscopy (FTIR) spectroscopy. The prepared FPC exhibited desirable characteristics essential for achieving electrochemical performances and adsorption of dyes as well. TEM revealed voids within the material's structure, while BET confirmed high porosity with an active surface area of 1498 m2/g, a pore volume of 1.2 cm³/g, and a pore size of 4.6 nm featuring a harmonious presence of both micropores and mesopores. XRD and Raman spectroscopy confirmed FPC's amorphous state, and FTIR indicated oxygenated functional groups. As a supercapacitor electrode material, FPC demonstrated a specific capacitance of 156.3 F/g at 1A/g current density, an energy density of 5.1 Wh/Kg, a power density of 183.6 W/kg, and enduring cycling stability, retaining 98.4 % performance after 1000 charge-discharge cycles at 3A/g current density. In terms of dye adsorption, FPC exhibited remarkable efficiency. At a pH of 10.5 for MG dye, 0.030g of FPC displayed peak adsorption capacity, removing 95.6 % of 20 ppm MG within 2 min and an even more impressive 99.6 % within 6 min. These findings confirm FPC's potential from Alnus nepalensis as an outstanding supercapacitor electrode material and a rapid, efficient adsorbent for MG removal from industrial wastewater. This research suggests promising applications in energy storage and environmental remediation.

25 July 2022 in Journal of the Korean Wood Science and Technology
Verified
Journal Article
Open access
PDF file
DSDibyashree Shrestha
Dibyashree Shrestha
The Journal of the Korean Wood Science and Technology (JKWST) launched in 1973 as an official publication of the Korean Society of Wood Science and Technology has been served as a core of knowledges on wood science and technology.

28 July 2025 in Asian Journal of Water, Environment and Pollution
Verified
Journal Article
Open access
PDF file
DSDibyashree Shrestha
Dibyashree Shrestha
Bombax ceiba wood waste-derived activated carbon (AC) provides a low-cost, sustainable, and efficient solution for rhodamine B (RhB) dye removal from industrial wastewater through eco-friendly adsorption techniques. This study reports the synthesis of ACs from B. ceiba wood dust using three different chemical activating agents – phosphoric acid, potassium hydroxide, and sodium carbonate – followed by carbonization at an optimized temperature determined through thermogravimetric (TG) analysis and differential scanning calorimetry. The optimal carbonization temperature was identified as 400°C. AC samples were prepared through a one-step chemical impregnation and carbonization process under nitrogen flow. Comprehensive characterization using X-ray diffraction, Raman spectroscopy, Fourier-transform infrared spectroscopy, scanning electron microscopy, and Brunauer–Emmett–Teller surface area analysis confirmed the formation of amorphous carbon structures with abundant oxygenated surface functional groups and porous architectures. Among the three samples, phosphoric acid-activated carbon (Bc-H) exhibited the highest surface area (1,451.2 m²/g) and a well-developed micro–mesoporous structure. Batch adsorption experiments showed that Bc-H achieved 99.9% RhB removal under optimized conditions (20 ppm initial dye concentration, pH 8.5, 0.03 g adsorbent, 10 min). Its superior performance is attributed to its large surface area and rich surface functionalities. Notably, Bc-H also outperformed commercial AC under identical conditions, demonstrating faster kinetics and higher removal efficiency. These findings underscore B. ceiba wood dust as a low-cost and sustainable precursor for high-performance AC production. The work contributes to waste biomass valorization and offers a scalable, eco-friendly solution for industrial wastewater treatment, particularly relevant to textile and dyeing effluents in resource-limited settings such as Nepal.