Glass waste contributes about 5% of the total solid waste generated worldwide that ends up in landfills without recycling resulting in considerable environmental harm. In this research, Waste Glass Powder (WGP) was studied to be used as a supplementary material substituted with sand in the concrete mix. The concrete mixes were prepared by replacing the natural sand with WGP in weight proportions of 10% to 50%, with a 10% increment to examine the mechanical effect of WGP addition on concrete performance in the fresh and hardened status. The concrete mixes were tested to evaluate the compressive strength for curing ages 7, 14, 21, 28, 56, and 90 days. Splitting tensile strength was also tested for curing at ages of 7, 14, 21, and 28 days. The obtained results showed a notable decrease in workability value for all concrete mixes with WGP addition. Also, the addition of WGP decreases the compressive strengths of all concrete mixes. However, the WGP enhanced the splitting tensile strength by about 12%. It has been concluded that the WGP can be used as a substituted material replaced with sand up to 30%, which was the optimum replacement ratio based on the Iraqi required specifications. By using this ratio, the compressive strength was decreased by 18% at 28 days of concrete curing age.
The infiltration process is an essential element of the hydrological cycle and water management. To provide a consideration for selecting an infiltration model and setting parameter values in the Oum Zessar watershed, the effectiveness of four infiltration models—Horton, Philip, Kostiakov, and Green–Ampt—is systematically evaluated using infiltration rate data measured in several field locations. The constant infiltration rate (CIR) of several locations was assessed using the double-ring infiltrometer technique and juxtaposed with values derived from the models. The parametric equations of each model were calibrated using time-series infiltration data obtained from the experimental observations. Excel functions were used to simplify the intricate mathematical calculations of the parameters. The model’s accuracy was assessed using six statistical metrics: Root Mean Square Error (RMSE), Sum of Squared Errors (SSE), Standard Error (STD ERR), and bias, along with the highest values of Nash–Sutcliffe Efficiency (NSE) and correlation (CORR). The greatest values of NSE and CORR, along with the lowest values of RMSE, SSE, STD ERR, and bias, indicate the optimal model. Moreover, the Model Performance Index (MPI) was implemented to evaluate the effectiveness of the modules by providing a clear scoring system for the models. The obtained results indicated that Kostiakov model displays the optimal fitting values on all indicators and locations, and the Horton model showed the second-best fitting values in most of the indicators.