Electrically conductive, highly flexible graphene membranes hold great promise for harvesting energy from ambient vibrations. For this study, we built numerous three-dimensional graphene ripples, with each featuring a different amount of compression, and performed molecular dynamics simulations at elevated temperatures. These ripples have a convex cosine shape, then spontaneously invert their curvature to concave. The average time between inversion events increases with compression. We use this to determine how the energy barrier height depends on strain. A typical convex-to-concave curvature inversion process begins when the ripple’s maximum shifts sideways from the normal central position toward the fixed outer edge. The ripple’s maximum does not simply move downward toward its concave position. When the ripple’s maximum moves toward the outer edge, the opposite side of the ripple is pulled inward and downward, and it passes through the fixed outer edge first. The ripple’s maximum then quickly flips to the opposite side via snap-through buckling. This trajectory, along with local bond flexing, significantly lowers the energy barrier for inversion. The large-scale coherent movement of ripple atoms during curvature inversion is unique to two-dimensional materials. We demonstrate how this motion can induce an electrical current in a nearby circuit.
Highly flexible, electrically conductive freestanding graphene membranes hold great promise for vibration-based applications. This study focuses on their integration into mainstream semiconductor manufacturing methods. We designed a two-mask lithography process that creates an array of freestanding graphene-based variable capacitors on 100 mm silicon wafers. The first mask forms long trenches terminated by square wells featuring cone-shaped tips at their centers. The second mask fabricates metal traces from each tip to its contact pad along the trench and a second contact pad opposite the square well. A graphene membrane is then suspended over the square well to form a variable capacitor. The same capacitor structures were also built on 5 mm by 5 mm bare dies containing an integrated circuit underneath. We used atomic force microscopy, optical microscopy, and capacitance measurements in time to characterize the samples.
We present an Ito-Langevin model for freestanding graphene connected to an electrical circuit. The graphene is treated as a Brownian particle in a double-well potential and is adjacent to a fixed electrode to form a variable capacitor. The capacitor is connected in series with a battery and a load resistor. The capacitor and resistor are given separate thermal reservoirs. We have solved the coupled Ito-Langevin equations for a broad range of temperature differences between the two reservoirs. Using ensemble averages, we report the rate of change in energy, heat, and work using stochastic thermodynamics. When the resistor is held at higher temperatures, the efficiency of the heat engine rises linearly with temperature. However, when the graphene is held at higher temperatures, the efficiency instantly rises and then plateaus. Also, twice as much entropy is produced when the resistor is hotter compared to when the graphene is hotter. Unexpectedly, the temperature of the capacitor is found to alter the dissipated power of the resistor.
The extraordinary mechanical flexibility, high electrical conductivity, and nanoscale instability of freestanding graphene make it an excellent candidate for vibration energy harvesting. When freestanding graphene is stretched taut and subject to external forces, it will vibrate like a drum head. Its vibrations occur at a fundamental frequency along with higher-order harmonics. Alternatively, when freestanding graphene is compressed, it will arch slightly out of the plane or buckle under the load. Remaining flat under compression would be energetically too costly compared to simple bond rotations. Buckling up or down, also known as ripple formation, naturally creates a bistable situation. When the compressed system vibrates between its two low-energy states, it must pass through the high-energy middle. The greater the compression, the higher the energy barrier. The system can still oscillate but the frequency will drop far below the fundamental drum-head frequency. The low frequencies combined with the large-scale movement and the large number of atoms coherently moving are key factors addressed in this study. Ten ripples with increasing compressive strain were built, and each was studied at five different temperatures. Increasing the temperature has a similar effect as increasing the compressive strain. Analysis of the average time between curvature inversion events allowed us to quantify the energy barrier height. When the low-frequency bistable data were time-averaged, the authors found that the velocity distribution shifts from the expected Gaussian to a heavy-tailed Cauchy (Lorentzian) distribution, which is important for energy harvesting applications.
High electrical conductivity and optical transparency make graphene a suitable candidate for photovoltaic-based power systems. In this study, we present the design and fabrication of an array of graphene-based Schottky junction solar cells. Using mainstream semiconductor manufacturing methods, we produced 96 solar cells from a single 100 mm diameter silicon wafer that was precoated with an oxide layer. The fabrication process involves removing the oxide layer over a select region, depositing metal contacts on both the oxide and bare silicon regions, and transferring large-area graphene onto the exposed silicon to create the photovoltaic interface. A single solar cell can provide up to 160 μA of short-circuit current and up to 0.42 V of open-circuit voltage. A series of solar cells are wired to recharge a 3 V battery intermittently, while the battery continuously powers a device. The solar cells and rechargeable battery together form a power system for any 3-volt low-power application.
Powering modern nanowatt sensors from omnipresent low-level kinetic energy: This study investigates the power levels produced by a varying-capacitance kinetic energy harvesting system. A model system consisting of a uniformly driven rotating capacitor was built to develop an accurate output power performance model. We found a quantitative linear relationship between the rectified output current and the input applied bias voltage, driving frequency, and capacitance variation. We also demonstrate that our variable capacitor system is equivalent to a fixed capacitor driven with an alternating current power source. Both the fixed-capacitance and varying-capacitance energy harvesting systems recharge a three-volt battery, which in turn powers a custom ultralow-power-consuming temperature sensor system.