Hao Chen

Mr. Hao Chen


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2016 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
Verified
Journal Article
Open access
HCHao Chen
Hao Chen
SCShane R. Cloude
Shane R. Cloude
DGDavid G. Goodenough
David G. Goodenough
In this paper, we report results of a study aimed at assessing the potential for using X-band single-pass radar interferometric coherence for forest canopy height estimation. We use datasets from the Tandem-X satellite pair collected over Canadian forest test sites, where supporting lidar data are available for validation. We first employ dual-copolarized modes to assess the potential of polarimetric interferometry for forest canopy height retrieval. We show that for this forest type, single polarization modes have better properties, including much improved spatial coverage. We develop a new algorithm for single polarization data and validate the canopy height products against lidar. We then extend the canopy height product over a mosaic of multiple swaths to demonstrate the potential for very wide area forest height mapping using radar coherence.

30 December 2014 in BMC Plant Biology
Verified
Journal Article
Open access
PDF file
Jun-Jun LiuJun-Jun Liu
Jun-Jun Liu
RSRichard Sniezko
Richard Sniezko
RSRona N Sturrock
Rona N Sturrock
HCHao Chen
Hao Chen
Western white pine (WWP, Pinus monticola Douglas ex D. Don) is of high interest in forest breeding and conservation because of its high susceptibility to the invasive disease white pine blister rust (WPBR, caused by the fungus Cronartium ribicola J. C. Fisch). However, WWP lacks genomic resource development and is evolutionarily far away from plants with available draft genome sequences. Here we report a single nucleotide polymorphism (SNP) study by bulked segregation-based RNA-Seq analysis. A collection of resistance germplasm was used for construction of cDNA libraries and SNP genotyping. Approximately 36–89 million 2 × 100-bp reads were obtained per library and de-novo assembly generated the first shoot-tip reference transcriptome containing a total of 54,661 unique transcripts. Bioinformatic SNP detection identified >100,000 high quality SNPs in three expressed candidate gene groups: Pinus highly conserved genes (HCGs), differential expressed genes (DEGs) in plant defense response, and resistance gene analogs (RGAs). To estimate efficiency of in-silico SNP discovery, genotyping assay was developed by using Sequenom iPlex and it unveiled SNP success rates from 40.1% to 61.1%. SNP clustering analyses consistently revealed distinct populations, each composed of multiple full-sib seed families by parentage assignment in the WWP germplasm collection. Linkage disequilibrium (LD) analysis identified six genes in significant association with major gene (Cr2) resistance, including three RGAs (two NBS-LRR genes and one receptor-like protein kinase -RLK gene), two HCGs, and one DEG. At least one SNP locus provided an excellent marker for Cr2 selection across P. monticola populations. The WWP shoot tip transcriptome and those validated SNP markers provide novel genomic resources for genetic, evolutionary and ecological studies. SNP loci of those candidate genes associated with resistant phenotypes can be used as positional and functional variation sites for further characterization of WWP major gene resistance against C. ribicola. Our results demonstrate that integration of RNA-seq-based transcriptome analysis and high-throughput genotyping is an effective approach for discovery of a large number of nucleotide variations and for identification of functional gene variants associated with adaptive traits in a non-model species.

24 September 2018 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
Verified
Journal Article
Closed access
HCHao Chen
Hao Chen
SCShane Cloude
Shane Cloude
DGDavid G. Goodenough
David G. Goodenough
DHDavid A. Hill
David A. Hill
ANAndrea Nesdoly
Andrea Nesdoly
In this paper, we consider the problem of radar estimation of forest canopy height in regions with dense forests and severe topography. We combine a reference digital elevation model with multiple satellite baselines from ascending and descending orbits to develop a merging algorithm relating single pass interferometric coherence to forest canopy height. We first describe the algorithm and processing steps used for height estimation and then apply the technique to a mountainous study site in British Columbia, Canada, using data from the Tandem-X satellite pair. We devise a new masking scheme to isolate potential problem areas in sloped terrain and apply the new merging algorithm by using multiple Tandem-X tracks to overcome the gaps left due to the masking procedure. The radar height products are validated by using a network of ground forest measurement sites and supporting lidar. The regression statistics show an r 2 of 0.70 and rmse of 4.1 m between the radar and the field measured heights. By examining height errors, we implement a new test for the presence of canopy extinction, or subcanopy surface scattering, and demonstrate that in the dense and mountainous forests of British Columbia, there are significant canopy extinction effects in X-band imagery.

7 February 2017 in Plant Biotechnology Journal
Verified
Journal Article
Open access
PDF file
Jun-Jun LiuJun-Jun Liu
Jun-Jun Liu
RSRichard Sniezko
Richard Sniezko
AZArezoo Zamany
Arezoo Zamany
HWHolly Williams
Holly Williams
NWNing Wang
Ning Wang
RSRona N. Sturrock
Rona N. Sturrock
Molecular breeding incorporates efficient tools to increase rust resistance in five‐needle pines. Susceptibility of native five‐needle pines to white pine blister rust (WPBR), caused by the non‐native invasive fungus Cronartium ribicola (J.C. Fisch.), has significantly reduced wild populations of these conifers in North America. Major resistance (R) genes against specific avirulent pathotypes have been found in several five‐needle pine species. In this study, we screened genic SNP markers by comparative transcriptome and genetic association analyses and constructed saturated linkage maps for the western white pine (Pinus monticola) R locus (Cr2). Phenotypic segregation was measured by a hypersensitive reaction (HR)‐like response on the needles and disease symptoms of cankered stems post inoculation by the C. ribicola avcr2 race. SNP genotypes were determined by HRM‐ and TaqMan‐based SNP genotyping. Saturated maps of the Cr2‐linkage group (LG) were constructed in three seed families using a total of 34 SNP markers within 21 unique genes. Cr2 was consistently flanked by contig_2142 (encoding a ruvb‐like protein) and contig_3772 (encoding a delta‐fatty acid desaturase) across the three seed families. Cr2 was anchored to the Pinus consensus LG‐1, which differs from LGs where other R loci of Pinus species were mapped. GO annotation identified a set of NBS‐LRR and other resistance‐related genes as R candidates in the Cr2 region. Association of one nonsynonymous SNP locus of an NBS‐LRR gene with Cr2‐mediated phenotypes provides a valuable tool for marker‐assisted selection (MAS), which will shorten the breeding cycle of resistance screening and aid in the restoration of WPBR‐disturbed forest ecosystems.

23 July 2021 in Remote Sensing
Verified
Journal Article
Open access
PDF file
HCHao Chen
Hao Chen
SCShane Cloude
Shane Cloude
Joanne WhiteJoanne White
Joanne White
In this paper, we consider a new method for forest canopy height estimation using TanDEM-X single-pass radar interferometry. We exploit available information from sample-based, space-borne LiDAR systems, such as the Global Ecosystem Dynamics Investigation (GEDI) sensor, which offers high-resolution vertical profiling of forest canopies. To respond to this, we have developed a new extended Fourier-Legendre series approach for fusing high-resolution (but sparsely spatially sampled) GEDI LiDAR waveforms with TanDEM-X radar interferometric data to improve wide-area and wall-to-wall estimation of forest canopy height. Our key methodological development is a fusion of the standard uniform assumption for the vertical structure function (the SINC function) with LiDAR vertical profiles using a Fourier-Legendre approach, which produces a convergent series of approximations of the LiDAR profiles matched to the interferometric baseline. Our results showed that in our test site, the Petawawa Research Forest, the SINC function is more accurate in areas with shorter canopy heights (<~27 m). In taller forests, the SINC approach underestimates forest canopy height, whereas the Legendre approach avails upon simulated GEDI forest structural vertical profiles to overcome SINC underestimation issues. Overall, the SINC + Legendre approach improved canopy height estimates (RMSE = 1.29 m) compared to the SINC approach (RMSE = 4.1 m).

9 November 2018 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
Verified
Journal Article
Closed access
SCShane Cloude
Shane Cloude
DGDavid G. Goodenough
David G. Goodenough
HCHao Chen
Hao Chen
YRY S Rao
Y S Rao
WHWen Hong
Wen Hong
In this paper, we consider the problem of true transmitter polarization state estimation for circular compact SAR modes. We employ two methods—the first using point targets such as trihedral reflectors, and the second, a new method, based on the Pauli phase observed over distributed targets like forest canopy. We first show how compact modes allow estimation of the Pauli phase for reflection symmetric scatterers. We show that this phase remains remarkably constant over forest canopies, depending primarily on the dielectric constant of constituent volume particles. We show that small imperfections in the transmit polarization state then lead to large errors in this phase estimate. These errors can then be used as the basis for a calibration strategy that allows estimation of a set of candidate true transmitter states. These can then be compared with the trihedral estimates for validation. We illustrate using L-band compact data from the JAXA ALOS-2 satellite and C-band data from the ISRO RISAT-1 satellite.