Javier Serrano

Mr. Javier Serrano


Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 February 2018 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
JSJavier Serrano
Javier Serrano
JAJesus Acero
Jesus Acero
ILIgnacio Lope
Ignacio Lope
CCClaudio Carretero
Claudio Carretero
JBJose Miguel Burdio
Jose Miguel Burdio
Domestic induction cookers are evolving from fixed cooking areas to flexible surfaces in such a way that the pot can be placed at any position. This implies the use of a larger number of reduced-sized inductors, which present a lower efficiency. As a solution to increase the efficiency while maintaining the flexibility, we propose the use of partially overlapped inductors of a larger size. This concept is currently in use in wireless power transfer systems, where the transmitter arrangement consists of several overlapped coils. The aim of this paper is to evaluate this concept applied to domestic induction heating appliances, with special emphasis in analyzing the effects of introducing the multicoil system with dissipative media. Moreover, the losses in the winding will be studied in detail. The system will be prototyped and tested, delivering up to 3.7 kW.

24 August 2016 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
JSJavier Serrano
Javier Serrano
ILIgnacio Lope
Ignacio Lope
JAJesus Acero
Jesus Acero
CCClaudio Carretero
Claudio Carretero
JBJose Miguel Burdio
Jose Miguel Burdio
RARafael Alonso
Rafael Alonso
The following paper describes the design and optimization method for a small inductor in printed circuit board, which is later used in the implementation of a flexible cooking surface prototype. The method combines analytical developments with finite element analysis (FEA) simulations, providing an important decrease of the computational costs. This is followed by the corresponding calculations in order to minimize conduction and proximity losses in the winding by optimizing the copper volume in the winding and the conductor cross-section dimensions. A parametric analysis is carried out to define the induction system that leads to the optimal efficiency, which, moreover, proves extra-thin PCBs as the most suitable solution. A laboratory prototype of a flexible cooking surface was implemented and tested under real working conditions. The empirical characterization produced good results, which are consistent with the simulations. Additionally, the correct thermal behavior of the arrangement and its adaptability to different pot sizes was verified.

1 March 2017
Verified
Conference Paper
Closed access
JSJavier Serrano
Javier Serrano
JAJesus Acero
Jesus Acero
ILI. Lope
I. Lope
CCClaudio Carretero
Claudio Carretero
JBJ.M. Burdio
J.M. Burdio
RARafael Alonso
Rafael Alonso
In this work, a model for induction heating cooktops with non-linear loads is presented. The model includes both the electronic converter and the inductor-pot system, which is usually modeled by its frequency-dependent equivalent impedance. Due to the non-linear relation between the magnetic field and the magnetic flux density in ferromagnetic media, the equivalent impedance of the inductor-pot system is significantly dependent on the excitation level. In this direction, two common materials have been experimentally characterized by their permeability curve for a wide range of excitation levels. Once the magnetic properties of the materials are known, a simulation model was developed including the non-linear behavior. By means of the simulation model, the equivalent impedance is obtained as a function of the excitation frequency and level. The modeled non-linear load is finally introduced in the power converter model from which the main waveforms can be extracted. Finally, the model was experimentally verified. The system was tested under real working conditions showing good concordance with the simulations.

15 November 2018 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
JSJavier Serrano
Javier Serrano
ILIgnacio Lope
Ignacio Lope
JAJesus Acero
Jesus Acero
Domestic induction heating appliances are evolving from surfaces with three to five fixed cooking areas to flexible cooking zones. These are able to adapt to a number of vessels of any size and shape by using multiple coils. Some state-of-the-art induction systems make use of overlapped inductors in two layers, which combine the high efficiency of large inductors with the high flexibility of small adjacent coils. The main drawback of this concept is the unequal distance between different coils and the vessel, which implies that each coil presents a different impedance depending on its layer. This paper presents an induction system conformed by non-planar inductors. These inductors are designed in such a way that they can be assembled in overlapping structures while preserving equivalence among them, i.e. they all present the same impedance. The paper includes the FEM modeling of the non-planar coil, an analysis on the conductor's losses and an experimental verification.

1 March 2015
Verified
Conference Paper
Closed access
ILI. Lope
I. Lope
JAJesus Acero
Jesus Acero
JSJavier Serrano
Javier Serrano
CCC. Carretero
C. Carretero
RAR. Alonso
R. Alonso
JBJ.M. Burdio
J.M. Burdio
PCB implementation of planar windings replicates the structure of conventional litz wires in order to reduce the ac losses. This structure consists of a set of fine trace electrically connected in parallel which are transposed by means of changes of both trajectory and layer. An appropriate transposition strategy is essential to reduce the winding ac losses, however PCBs with high number of vias could result expensive and not reliable. Taking advantage of the field profile of planar windings, in this work is studied the minimization of the number of vias without significant reduction of performance. The work is carried out by means of a combination of finite-element analysis (FEA) simulations and experimental verification on ultra-thin (0.3 mm) PCB prototypes of planar inductors oriented to a domestic induction heating application.

1 March 2017
Verified
Conference Paper
Closed access
JAJesus Acero
Jesus Acero
JSJavier Serrano
Javier Serrano
CCClaudio Carretero
Claudio Carretero
ILIgnacio Lope
Ignacio Lope
JBJose Miguel Burdio
Jose Miguel Burdio
We evaluate copper tubes as alternative of litz wire for planar coils of inductive power transfer (IPT) systems. For this purpose, a design methodology focused on maximizing the product of the magnetic coupling and the quality factor is proposed. The methodology is based on a combination of FEA simulations and analytical calculations of the skin and proximity losses in the tube. Analytical calculations are based on solutions of Maxwell's equations for a tubular geometry. These solutions are oriented to extract both skin and proximity losses in the tube. Performance of a prototype of 1.5 kW is evaluated and compared with a conventional litz-wire implementation.