Microwave Imager Combined Active and Passive (MICAP), which is a package of active and passive microwave instruments including L/C/K-band radiometers and L-band scatterometer, has been chosen as one of the primary payloads for the Chinese Ocean Salinity Mission (COSM). The L-band one-dimensional synthetic aperture radiometer (L-Rad) is the key part of MICAP to measure sea surface salinity (SSS). As radio frequency interference (RFI) has been reported as a severe threat to L-band radiometry, it can be foreseen that MICAP L-Rad will encounter RFI contaminations unavoidably. Due to the conflict between the huge transmission data volume and the limited downlink budget, it is challenging for MICAP L-Rad to transmit all rapidly sampled sub-band data products and conduct on-ground RFI processing like Soil Moisture Active Passive (SMAP) microwave radiometer. The onboard real-time RFI detection and mitigation strategy is proposed accordingly for MICAP L-Rad. It is designed based on the distributed digital processing structure and the synthetic-aperture feature. The proposed RFI processing strategy is evaluated and verified by the system simulations and hardware experiment, demonstrating its RFI detection capability and low false alarm rate performance.

Microwave Imager Combined Active and Passive (MICAP), which is a package of active and passive microwave instruments including L/C/K-band radiometers and L-band scatterometer, has been approved to be taken onbord the Chinese Ocean Salinity Mission. The L-band one-dimensional synthetic aperture radiometer (L-Rad) is the key part of MICAP to measure sea surface salinity (SSS). Since radio frequency interference (RFI) is reported as a serious threat to L-band radiometry, the RFI detection and mitigation techniques must be carefully designed before launch. However, these techniques need to be developed based on the knowledge of how RFI affects complex correlation, visibility function, and reconstructed brightness temperature. This paper presents a time-domain signal modeling method for the simulation of interferometric measurement under RFI’s presences, and a simulation system for L-Rad is established accordingly. Several RFI cases are simulated with different RFI types, parameters, and positions; and the RFI characteristics upon L-Rad’s measurement are discussed. The proposed simulation system will be further dedicated to the design of RFI processing strategy onboard MICAP.