The seismic bearing capacity of a shallow strip footing above a void displays a complex dependence on several characteristics, linked to geometric problems and to the soil properties. Hence, setting analytical models to estimate such bearing capacity is extremely challenging. In this work, machine learning (ML) techniques have been employed to predict the seismic bearing capacity of a shallow strip footing located over a single unsupported rectangular void in heterogeneous soil. A dataset consisting of 38,000 finite element limit analysis simulations has been created, and the mean value between the upper and lower bounds of the bearing capacity has been computed at the varying undrained shear strength and internal friction angle of the soil, horizontal earthquake accelerations, and position, shape, and size of the void. Three machine learning techniques have been adopted to learn the link between the aforementioned parameters and the bearing capacity: multilayer perceptron neural networks; a group method of data handling; and a combined adaptive-network-based fuzzy inference system and particle swarm optimization. The performances of these ML techniques have been compared with each other, in terms of the following statistical performance indices: coefficient of determination (); root mean square error (); mean absolute percentage error; scatter index; and standard bias. Results have shown that all the ML techniques perform well, though the multilayer perceptron has a slightly superior accuracy featuring noteworthy results ( 0.9955 and 0.0158).
1 October 2021 in International Journal of Geomechanics
This study aims to predict the undrained seismic bearing capacity and failure mechanisms of a shallow strip footing that is placed on homogeneous and heterogeneous cohesive soils above a single unsupported rectangular void using finite-element limit analysis (FELA). Upper and lower bounds will be computed for a comprehensive range of geometries, horizontal earthquake accelerations, materials, void shapes, and size combinations. In addition, parameter studies will be carried out to quantify the effect of various factors on the bearing capacity of the footing to finally derive a design table that could be used to quickly predict the bearing capacity of the desired footing. The results show that according to the void condition, earthquake acceleration, and soil characteristics, there are four modes of failure: footing bearing failure without void failure; footing bearing failure with roof void failure; footing bearing failure with side; and roof void failure and void collapse without bearing failure. Finally, a sensitivity analysis will be carried out to show that the void depth and soil undrained shear strength are the most important parameters for the ultimate footing bearing capacity.
Reinforced concrete (RC) structural walls are widely used in high-rise structures in earthquake-prone areas. Damaged by the earthquakes in the past decades, these buildings need retrofitting in order to increase the resilience of buildings with concrete shear walls. This study aimed to investigate the retrofitting of high-rise RC wall buildings using energy dissipation devices. To this end, a total of four buildings with 15, 20, 25, and 30 stories equipped with concrete shear walls as their lateral load-resisting system were retrofitted using passive seismic control systems. The buildings were subjected to the set of the far-field and near-field records presented in the FEMA standard (P-695), and an index was defined to relate the structural responses of the building, such as drift, acceleration, velocity, displacement, and base shear, to the earthquake records. For this purpose, numerical models, which have been validated with the experimental results, have been performed. The resulting index values were considered as the criteria, and the passive systems were ranked by the efficient Multicriteria Decision Making (MCDM) method. Based on the results from the MCDM method and using the considered criteria, friction damper was ranked first among the available energy dissipation devices for high-rise RC wall buildings.