The equivalent source method is widely applied to study structural acoustic radiation in an underwater environment. However, there is still uncertainty in arranging the equivalent source, and the current mainstream configuration method needs a large number of equivalent sources, limiting its practical applicability. In this paper, an equivalent source configuration method that is simple, effective, and easy to implement, and which based on a tradeoff between the ill condition of the transfer matrix and the adequacy of the simulated structure’s radiated sound field, is proposed. The optimization method can derive the appropriate positions and quantity of monopole equivalent sources simultaneously. The method does not yield an optimal solution in a strict mathematical sense but provides satisfactory results compared with those obtained by uniformly distributed equivalent sources. Numerical simulation results showed that the optimization method derives accurate sound field calculation results with a relatively small number of equivalent sources, significantly reducing the number of subsequent calculations needed. Finally, the experiments conducted with a cylindrical shell structure verified the validity and practicality of the proposed method.
Spherical microphone arrays have been paid increasing attention for their ability to locate a sound source with arbitrary incident angle in three-dimensional space. Low-frequency sound sources are usually located by using spherical near-field acoustic holography. The reconstruction surface and holography surface are conformal surfaces in the conventional sound field transformation based on generalized Fourier transform. When the sound source is on the cylindrical surface, it is difficult to locate by using spherical surface conformal transform. The non-conformal sound field transformation by making a transfer matrix based on spherical harmonic wave decomposition is proposed in this paper, which can achieve the transformation of a spherical surface into a cylindrical surface by using spherical array data. The theoretical expressions of the proposed method are deduced, and the performance of the method is simulated. Moreover, the experiment of sound source localization by using a spherical array with randomly and uniformly distributed elements is carried out. Results show that the non-conformal surface sound field transformation from a spherical surface to a cylindrical surface is realized by using the proposed method. The localization deviation is around 0.01 m, and the resolution is around 0.3 m. The application of the spherical array is extended, and the localization ability of the spherical array is improved.
In the context of torpedo guidance systems, the performance of active sonar in channel parameter estimation and target detection and recognition is significantly degraded by the multipath effect and the time-varying characteristics of the underwater acoustic (UWA) channel. Therefore, it is urgent to propose an algorithm that can accurately estimate the channel parameters in multipath time-varying UWA channels. To solve these problems, this study developed a modified phase transform (PHAT)-weighted function and applied it to the orthogonal matching pursuit (OMP) algorithm, named M-PHAT-OMP. The proposed algorithm is more robust, improves the resolution of the time delay and further improves the estimation accuracy of the parameters in the case of motion. Furthermore, with the aim of solving the problem of the difficulty that the traditional OMP algorithm has in determining sparsity, this study proposes a joint-threshold method, where the threshold value serves as the condition for terminating the algorithm’s iteration. The simulation results demonstrate that the M-PHAT-OMP algorithm proposed in this study exhibits a superior performance compared to other algorithms, as evidenced by its lower root mean square error (RMSE) for delay. Moreover, the experimental results also validate that the proposed algorithm has superior robustness and resolution of the time delay in practical applications.
Detection of underwater coherent interference is necessary as its presence affects the estimation of the desired target. In this work, a method based on high-order particle velocity gradient polarization characteristics is proposed to distinguish the presence of coherent interference. Characteristics including ellipse ratio and inclination angles of the high-order particle velocity gradient are chosen as effective detection features because they remain unchanged at different orders of the desired target but changed at different orders of coherent signals when there is coherent interference. Based on such altered properties, a quick and effective marine detection system can be established. Both simulation and experimental results validate the proposed detection method.